To achieve a static equilibrium on the beam, the bucket of concrete mix should be suspended at the midpoint of the beam, directly above the cable.
This ensures that the weight of the bucket is balanced on both sides of the cable, so that the beam remains in a state of equilibrium. The bucket should also be suspended from a point that is directly above the cable, so that the force exerted by the cable is equal on both sides of the beam.
This will ensure that the beam does not tip or move from its current position. To further ensure the safety of the steel worker, the bucket should be securely attached to the beam so that it does not move around when the worker is standing on it.
Learn more about static equilibrium:
https://brainly.com/question/12582625
#SPJ4
(a) what is the magnitude of the average acceleration of a skier who, starting from rest, reaches a speed of 12.0 m/s when going down a slope for 3.98 s? (b) how far does the skier travel in this time?
The magnitude of the average acceleration of the skier is 3.10 m/s²
The total distance traveled by the skier from the rest is 24.55 m
The initial velocity of the skier = 0 m/s
The final velocity of the skier = 12 m/s
The time taken to reach the slope = 3.98 seconds
The magnitude of the acceleration can be found using the formula,
a = (v - u) / t
where a is the acceleration
v is the final velocity
u is the initial velocity
t is the total time taken
Let us substitute the known values in the above equation, we get
a = 12 - 0 / 3.98
= 12/3.98
= 3.01 m/s²
The distance traveled by the skier can be found using the formula
s = ut + 0.5at²
= 0 x 3.98 + 0.5 x 3.10 x 3.98²
= 0.5 x 3.10 x 15.84
= 24.55 m
Learn more about the acceleration in
https://brainly.com/question/2303856
#SPJ4
at what temperature, in kelvins, will the average kinetic energy of gas molecules be the same as the kinetic energy these ions gain?
The average kinetic energy of a substance's particles directly relates to the substance's Kelvin temperature. The atoms in a specimen of hydrogen, as an illustration
What is kinetic energy (KE)?
Kinetic energy (KE) is the term used in physics to describe an object's energy when it is in motion. The effort needed to move a surplus body at rest to a stated velocity is how it is defined.
What is the history of kinetic energy?
The terms "kinetic energy" and "labor" have been used in modern science since the beginning of the 19th century. The first knowledge of these ideas dates back to Gaspard-Gustave Coriolis, whose work Du Nalidixic acetylcholine receptors nachrs de l'Effet des Machines, published in 1829, explains the mechanics of kinetic energy.
To know more about kinetic energy visit:
https://brainly.com/question/26472013
#SPJ4
What is the work required to rotate the dipole from being oriented parallel to the field to being antiparallel to the field?
The work required to rotate a magnetic dipole from being oriented parallel to a magnetic field to being antiparallel to the field is determined by the interaction between the magnetic dipole and the magnetic field. The work done on the dipole, W, can be expressed as: W = - μ * B * Δθ
What does the term dipole refer to?A dipole is a pair of equal and opposite charges or magnetic poles separated by a small distance. It refers to a system with two poles, such as an electric dipole or a magnetic dipole.
How is a magnetic dipole different from electric dipole?An electric dipole consists of two charges, one positive and one negative, separated by a small distance. A magnetic dipole, on the other hand, consists of two magnetic poles, one north and one south, separated by a small distance.
To know more about magnet, visit here:
https://brainly.com/question/1396196
#SPJ4
Drag the tiles to the correct boxes to complete the pairs.
Match the synthetic materials with the processes used to make them.
heating clay and sand at high temperatures
using oil and gas as starting materials
mixing a metal element with other elements
The correct matching of the synthetic materials with the processes used to make them is given below:
synthetic polyme - [using oil and gas as starting materials]alloy - [mixing a metal element with other elements]ceramic - [heating clay and sand at high temperatures]What is a Synthetic Polymer?Synthetic polymers are macromolecules that are created when artificially produced monomers are combined.
Examples of this kind of compound include bakelite, nylon, and polyethylene.
These polymers enable the production of synthetic fibers with the goal of creating useful products (yarns and textiles), even items for the medical industry.
A thorough quality control is carried out during the synthesis of polyamide yarns in order to manage the thickness and uniformity of the fibers so that they can be used for a variety of purposes.
Read more about Synthetic polymers here:
https://brainly.com/question/15265692
#SPJ1
Answer: Drag the tiles to the correct boxes to complete the pairs.
Match the synthetic materials with the processes used to make them.
Synthetic polymer: using oil and gas as starting materials
Alloy: mixing a metal element with other elements
Ceramic: heating clay and sand at high temperatures
Explanation:
consider a copper rod that is 3.14 meters long, 2 cm in diameter, and has an electrical resistivity of 2x10-6 ohm-cm. what is the electrical resistance of the rod?
Resistance is denoted by the Greek symbol omega (), which also stands for the ohm, the unit of measurement. The formula states that R Equals L / A.
What does a metal's electrical resistance mean?The difference in electric potential increases with increasing current. In contrast, a high electric resistance will result in a low current. Alternatively put, a metal with low resistance is a superior conductor. Electrons in the metal are slowed down if there is an electric resistance.
How is resistance determined?By applying Ohm's Law, you can get the total resistance if you know the complete current and voltage through the entire circuit: R = One against / I. A parallel circuit, for instance, has a supply of 9 volts and a combined power of 3 amps. Total resistance (RT) is equal to 9 volts / 3 amps, or 3.
To know more about ohm visit:
https://brainly.com/question/29750972
#SPJ4
Whenever the net force on an object is zero, its acceleration _____.(a) and velocity are the same(b) is zero(c) may be zero(d) None of the above.
Whenever the net force on an object is zero, its acceleration is zero. This means that the object is either at time-out or moving at a constant velocity. If the object was initially at rest, it will remain at rest.
What is the net force?The net force is the force acting on an object. It is the sum of all the individual forces acting on the object. Net force confines the acceleration of an object.
What if the net force is not zero?If the net force on an object is not zero, the object will experience an acceleration in the direction of the net force. The magnitude of the net force is equal to the mass of the object multiplied by its acceleration.
To know more about acceleration, visit here:
https://brainly.com/question/30078521
#SPJ4
net neutrality is presented as creating a ________ that leads to __________.
The idea of net neutrality is to level the playing field and encourage innovation.
What is the concept of neutrality?Neutrality, which would be defined as the legal position that results from a state refraining from any involvement in a war between other states, maintaining an unbiased stance towards to the belligerents, and the belligerents acknowledging this abstention and impartiality, is crucial.
What is the concept of neutrality?Neutrality, which would be defined as the legal position that results from a state refraining from any involvement in a war between other states, maintaining an unbiased stance towards to the belligerents, and the belligerents acknowledging this abstention and impartiality, is crucial.
To know more about neutrality visit:
brainly.com/question/15830549
#SPJ4
finally, suppose m1→[infinity] , while m2 remains finite. what value does the the magnitude of the tension approach?
As the distance between the two charges in the dipole increases and one moves towards infinity, the magnitude of the electric field at the position of the remaining charge approaches the value of the electric field produced by a single-point charge.
What happens to the electric field when one charge moves towards infinity?When one of the charges in an electric dipole moves towards infinity, the electric field due to that charge becomes negligible compared to the field due to the other charge. As a result, the net electric field approaches that of a single-point charge located at the position of the remaining charge.
What value is the magnitude of the tension?In this scenario, the magnitude of the tension experienced by a point charge q approaches q times the electric field produced by a single point charge.
To know more about charge, visit here:
https://brainly.com/question/27171238
#SPJ4
Protocells are precursors to modern living cells. Despite being non-living matter, protocells exhibit some characteristics of life such as reproduction. However, protocells were unable to inherit traits. Why is this so?
The reason why protocells were unable to inherit traits is because they lack genetic material.
What are protocells ?Protocells are considered precursors to modern living cells because they exhibit some basic life-like properties, such as replication. However, protocells lack a key component of living cells, which is the genetic material in the form of DNA or RNA.
Protocells are unable to inherit traits because they lack genetic material. The absence of genetic material means that protocells cannot encode information or pass it on to their offspring, so they cannot produce the proteins necessary for metabolic functions or replicate themselves in a controlled manner.
Find out more on protocells at https://brainly.com/question/2385716
#SPJ1
insulating spheres a and b are initially neutral and touching. a positively charged rod is brought near a, but not touching. the spheres are separated, and then the rod is taken away. describe the resulting net charge of each sphere.
The electrons in the spheres pull away from the rod's electrons and gather to the right. As a result, the left sphere begins to accrue a positive charge.
The rod and the two spheres are then separated. The left sphere finally reaches positive charge, while the right sphere reaches negative charge.
What distinguishes a conducting sphere from an insulating sphere?A charge is carried by an insulating sphere and is distributed evenly across its volume. The charge on a conducting sphere of the same size is the same, but it is only distributed across its surface (as it must for a conductor.)
V=ar2+b, where a and b are constants, describes how the electric potential within a charged sphere changes with distance from its center. the sphere's interior space charge distribution (r).
learn more about insulating sphere
https://brainly.com/question/17577858
#SPJ4
a hockey puck sliding along frictionless ice with speed v to the right collides with a horizontal spring and compresses it by 3.0 cm before coming to a momentary stop. part a what will be the spring's maximum compression if the same puck hits it at a speed of 2v ? what will be the spring's maximum compression if the same puck hits it at a speed of 2? 3.0 cm 3.8 cm 6.0 cm 7.6 cm 10 cm
The spring's maximum compression if the same puck hits it at a speed of 2v will be 7.6 cm.
This is because the force of the impact is directly proportional to the puck's speed, so when the puck's speed doubles, the force of the impact doubles as well.
To calculate the spring's maximum compression, we can use the equation F = kx, where k is the spring constant, x is the maximum displacement, and F is the force of the impact.
Since we know the puck's speed (2v) and the maximum displacement (3 cm), we can solve for k to get k = F/x = (2v)/3. We can then use this value of k to calculate the maximum displacement at a speed of 2v, which is
x = F/k = (2v)/(2v/3) = 3*(2/3) = 2v.
Finally, we can multiply this value of x by 2 to get the spring's maximum compression for a speed of 2v, which is 7.6 cm.
For more questions like Spring click the link below:
https://brainly.com/question/14280940
#SPJ4
if you are looking down over the north pole of the earth, you will see the earth rotate to___
The Earth revolves counterclockwise, and if we were to gaze down on it from just above north pole, we would notice that day and night move over our planet from east to west.
Which direction is Earth rotating when viewed from the North Pole?The Earth is moving counterclockwise, toward west to east, when seen from above the North Pole. The prograde rotation is another name for this. We observe the sun rising in the eastern and sinking in the west every day as a result of this path of revolution.
According to the South Pole, which way does the Earth spin?Earth would look to be turning counterclockwise if you were floating above the earth and gazing directly down there at North Pole. When gazing up so at South Pole from below the Earth, you would say that the rotation is clockwise.
To know more about Earth visit:
https://brainly.com/question/15483255
#SPJ4
which ball (if either) has the greatest speed at the moment of impact? view available hint(s)for part a which ball (if either) has the greatest speed at the moment of impact? the ball thrown horizontally the dropped ball both balls have the same speed.
Therefore, both balls will have the same vertical speed at the moment of impact, which is the sum of their vertical and horizontal speeds.
What is moment of impact?In physics, a collision is the abrupt, powerful coming together of two bodies, such as two billiard balls, a golf club and a ball, a hammer and a nail head, two train carriages when paired together, or a falling item and a floor. Its formula equates the product of a body's mass and velocity to twice the time taken. The force created when two objects collide is known as the force of impact. The stronger the impact or hitting power of your vehicle, the faster you drive. The force of impact rises with the square of the increase in speed, according to physical rules.
Here,
Both balls have the same speed at the moment of impact. The vertical speed of the dropped ball is determined solely by its initial height and the acceleration due to gravity. The horizontal speed of the ball thrown horizontally is constant and does not change.
To know more about moment of impact,
https://brainly.com/question/26859103
#SPJ4
the mass of a subway car and passengers is 34,800 kg. if its acceleration as it leaves a station is 0.8 m/s2, what is the net force (in n) acting on it? (enter the magnitude.)
The net force acting on the subway car and passengers can be calculated using Newton's second law of motion:
F = ma = 34,800 kg * 0.8 m/s^2 = 27,840 N.
So the net force is 27,840 N, or 27,840 N in magnitude.
What is the acceleration of the subway car as it leaves the station?The acceleration of the subway car as it leaves the station is 0.8 m/s2. This means that every second, the subway car's velocity is increasing by 0.8 meters per second. The acceleration is a measure of how quickly the speed of an object changes and it plays an important role in determining the net force acting on the subway car and passengers. The net force is the force that drives the subway car forward and it is calculated by multiplying the mass of the subway car and passengers by the acceleration.
To know more about Acceleration visit: https://brainly.com/question/2303856
#SPJ4
a charge of 6.15 mc is placed at each corner of a square 0.100 m on each side. what is the magnitude of the force on each charge?
The magnitude of the 6.15 mc charge is placed at each corner of a square 0.100 m on each side = 46 N on each side.
The force acting on one charge is the same as the force acting on all other charges because charges are arranged in a square.
The superposition principle will be applied. Accordingly, the force acting on the charge is made up of a variety of separate forces.
We will analyze the forces on the x and y axes as follows:
Fx = F3 F2 cos45⁰
= 1/4π€ (q²/a²)
= 46 N
Fy = F1F2 sin 45⁰
= 1/4π€ (q²/√2a²)
= 46 N
Learn more about charge here: https://brainly.com/question/30398254
#SPJ4
if the energy of the (doubly charged) alpha nucleus was 5.1 mev, how close to the gold nucleus (79 protons) would it come before being deflected?
If the energy of the (double-charged) alpha nucleus is 5.1 MeV, then the gold nuclei (79 protons) before being deflected will be 4.55 x 10⁻¹⁴ m close together.
Alpha particles (named after the first letter of the Greek alphabet, α) are a highly ionizing, low-penetrating form of particle radiation. In the given problem:
Charge of alpha particle: q₁ = 2 x 1.6 x 10⁻¹⁹ CEnergy of alpha particle: KE = 5 x 10⁶ eV = 5 x 10⁶ x 1.6 x 10⁻¹⁹ JCharge of gold nucleus: q₂ = 79 x 1.6 x 10⁻¹⁹ CElectric force constant: k = 9 x 10⁹ N m²/C²KE = kq₁q₂/r
5 x 10⁶ x 1.6 x 10⁻¹⁹ = (9 x 10⁹)(2 x 1.6 x 10⁻¹⁹)(79 x 1.6 x 10⁻¹⁹)/r
r = (9 x 10⁹)(2 x 1.6 x 10⁻¹⁹)(79 x 1.6 x 10⁻¹⁹)/ 5 x 10⁶ x 1.6 x 10⁻¹⁹
r = 4.55 x 10⁻¹⁴ m
So, the distance of the gold core from the alpha particles before they are close together is 4.55 x 10⁻¹⁴ m.
Learn more about alpha particles at https://brainly.com/question/1383550.
#SPJ4
assume the trajectory featured in figure 4.6b (p. 84 of text and reproduced below) is of a ball thrown near the surface of the earth, and the y axis points vertically upward. is the ball only under the influence of gravity?
Assuming that the ball is thrown near the surface of the Earth and the y-axis points vertically upward, then the ball is certainly under the influence of gravity.
Gravity is a force that acts on all objects with mass, and it causes objects to accelerate toward the center of the Earth. When a ball is thrown near the surface of the Earth, it experiences a downward force due to gravity that causes it to follow a parabolic trajectory.
However, other forces could also be acting on the ball depending on the specific situation. For example, if the ball is being thrown horizontally, it will experience air resistance or drag, which could affect its trajectory.
If the ball is being thrown at an angle, it will experience a combination of horizontal and vertical forces, and the trajectory will depend on the relative magnitudes and directions of those forces.In summary, while the ball is definitely under the influence of gravity, other forces could also be at play depending on the specifics of the situation.
To know more about gravity here
https://brainly.com/question/14874038
#SPJ4
a stationary bagpiper is playing a highland bagpipe, in which one reed produces a continuous sound of frequency 440 hz . the air is still and the speed of sound is 340 m/s . what is the wavelength of the sound wave produced by the bagpipe?
The wavelength of the sound wave produced by the bagpipe is 0.773 m.
What is a wave length?The separation between two identical locations in two succeeding waves is known as the wavelength of a wave. The separation between each wave's crest (or trough) and the next is known as the wavelength. Equations that describe wavelength use the Greek letter lambda as the representation.
The wavelength of light determines its hue, much as the wavelength of sound determines its pitch. The visible spectrum of light has wavelengths between around 700 nm (red) to 400 nm (violet). Audible sound has a wavelength that ranges from 17 mm to 17 m. Compared to visible light, audible sound has much longer wavelengths.
Given, Frequency of sound, f = 440 Hz
Speed of sound, v = 340 m/s
For the wavelength of the sound wave,
v = f × λ
Putting the values,
λ = [tex]\frac{340}{440}[/tex]
To know more about wavelength, visit:
brainly.com/question/24452579
#SPJ4
a car starts from rest at a stop sign. it accelerates at 3.47 m/s2 for 5.89 seconds, coasts for 2.61 s, and then slows down at a rate of 2.18 m/s2 for the next stop sign. how far apart are the stop signs?
The distance apart are the stop signs is found to be 208.78m
What is the length of the motion?The length of the maintains close an object's starting point and its destinations dictates how far it travels. Distance is the amount of time that an object moves over time. A force is applied to an item, and the more force is applied, the farther the thing will move.
The initial velocity =0
[tex]t_1= 5.89s ; a_1 = 3.47m/s^2\\\\t_2 = 2.61s ; a_2 =0\\a_3 = -2.18m/s^2[/tex]
d1 =
[tex]ut1 + 1/2a_1\times t_1^2 ;\\ u=0 = 1/2 x 3.47 x 5.89^2 = 60.1m[/tex]
v1 =
[tex]u + a_1\timest_1 = 0 + 3.47 \times 5.89 \\= 20.4m/s[/tex]
d2
[tex]= > v_1t_2 + 1/2a2t_2^2 = 20.4 \times 2.61 + 1/2 \times 0 \times t2^2 = 53.24m[/tex]
[tex]v_f = v_1 + a_3t_3[/tex]
=0 = 20.4 + (-2.18) x t3
[tex]t_3= 9.35[/tex]
d3
[tex]20.4 \times 9.35 -1/2 \times 2.18 \times 9.35^2 = 95.44m[/tex]
The distance between two stop is
[tex]d1+ d2+d3 = 60.1+ 53.24+95.44 \\ 208.78m[/tex]
Learn more about accelerates here:
brainly.com/question/19154203
#SPJ4
if a block is moving to the left at a constant velocity, what can one conclude?
Answer:
I will continue to go left untill forces such as gravity and friction act uppon it.
Explanation:
PLEASE HELP IM IN A TEST , ILL GIVE 100 POINTS!! How are visible light, the electromagnetic spectrum, and photoreceptors in the eye related?
A. Photo receptors in the eye detect the electromagnetic spectrum which contains a range known as visible light
B. Photo receptors in the eye detect visible light which is part of the wider electromagnetic spectrum
C. Photo receptors in the eye detect visible light which contains a range known as the electromagnetic spectrum
D. Photo receptors in the eye detect the electromagnetic spectrum which is part of the water visible light range
Answer:
B. Photo receptors in the eye detect visible light which is part of the wider electromagnetic spectrum
Explanation:
Electromagnetic spectrum is wide and huge and a range in this spectrum (around wavelenght 380 to 700 nanometers) is called visible light spectrum which is the only light that our eyes can see.
Thus photoreceptors in eye detect visible light which is part of bigger spectrum (we CANNOT see the entire electromagnetic spectrum only a small range which is known as visible light spectrum range).
I know the answer but the wording is tricky so I am not sure between A and B. Im sorry if I get it wrong. A sounds sort of right but I would not go with it cuz it says receptors detect electromagnetic spectrum (but we DO NOT detect all of the spectrum only a small portion)
Go with your gut.
an object has a charge of 1 coulomb. how many excess charges does it contain? group of answer choices 6.023 x 1023 insufficient information avogrado number of charges
An object has a charge of 1 coulomb and excess charges that it contains is 6.25 x 10¹⁸.
How many excess charges does a charge of 1 coulomb contain?To illustrate the magnitude of 1 Coulomb, object would need an excess of 6.25 x 10¹⁸ electrons to have total charge of -1 C. An object with a shortage of 6.25 x 10¹⁸ electrons would have total charge of +1 C and the charge on single electron is -1.6 x 10⁻¹⁹ Coulomb.
Charge q on a body must always exist as an integral multiple of fundamental unit charge e, charge of an electron, where e=1.6×10⁻¹⁹C.
Thus, for 1 coulomb of charge the body will hold 1/1.6×10⁻¹⁹
=6.25×10¹⁸ electrons.
To know more about electrons, refer
https://brainly.com/question/25674345
#SPJ4
a mass of 5 kg initially hangs from a pulley by a rope. the pulley itself has a mass of 20 kg and a radius of 0.5 m. if this system is released from rest, you observe the mass falls downward and the pulley rotates clockwise. what will be the angular acceleration of the pulley in rad/s2?
The angular acceleration of the pulley can be determined by considering the forces acting on the system and the moment of inertia of the pulley. Based on the task, the angular acceleration of the pulley is 2.45 rad/[tex]s^{2}[/tex].
The angular acceleration of the pulley can be determined by considering the forces acting on the system and the moment of inertia of the pulley. The net force acting on the system is given by the weight of the hanging mass, which creates a tension in the rope that is transferred to the pulley. The tension in the rope produces a torque on the pulley, given by:
The tension in the rope produces a torque on the pulley, given by:
τ = T * r
where,
T = the tension in the rope
r = the radius of the pulley.
The net torque on the pulley can be used to determine its angular acceleration, given by:
α = τ / I
where,
I is the moment of inertia of the pulley, given by:
I = (1/2) * m * [tex]r^{2}[/tex] + m * [tex]r^{2}[/tex]
where m is the mass of the pulley.
Substituting the values, we get:
α = (T * r) / ((1/2) * m * [tex]r^{2}[/tex] + m * [tex]r^{2}[/tex])
= (5 * 9.8 * 0.5) / ((1/2) * 20 * [tex]0.5^{2}[/tex] + 20 * [tex]0.5^{2}[/tex])
= 49 / 20
= 2.45 rad/[tex]s^{2}[/tex]
Here you can learn more about The angular acceleration
brainly.com/question/15856260
#SPJ4
Which explanation is based on scientific evidence
The evidence that supports or counters a scientific hypothesis or theory is called scientific evidence.
What is scientific evidence?Although scientists frequently utilize evidence in other ways, such as when applying ideas to real-world issues, scientific evidence is evidence that helps to either support or refute a scientific theory or hypothesis.
Such proof is anticipated to be empirical and interpretable using scientific techniques. The requirements for scientific evidence vary depending on the area of study, but they are often based on the outcomes of statistical analysis and the quality of scientific controls.
Learn more about scientific evidence here:
https://brainly.com/question/5505307
#SPJ1
if the particle has a constant horizontal velocity to the right, what is the direction of the acceleration of the particle?
The direction of acceleration of a particle is given by the direction of the change in velocity of the particle. If a particle has a constant horizontal velocity to the right, its velocity is not changing, and therefore its acceleration is zero.
Acceleration is a measure of the rate of change of velocity of an object over time. It is a vector quantity, meaning it has both magnitude and direction. In general, if an object's velocity changes, it is said to be accelerating, and the direction of acceleration is given by the direction of the change in velocity.
In physics, acceleration is defined as a vector quantity with units of meters per second squared (m/s^2), and it is often represented by the symbol "a". The acceleration vector points in the direction of the change in velocity, and its magnitude is given by the rate of change of velocity.
In the case of a particle with a constant horizontal velocity to the right, the velocity vector remains constant and unchanging, so the acceleration vector is zero. This means that there is no change in velocity, and no acceleration. The particle continues to move at a constant velocity to the right, without speeding up or slowing down.
Learn more about acceleration here:
https://brainly.com/question/12550364
#SPJ4
suppose a car travels 109 km at a speed of 25.0 m/s, and uses 2.0 gal of gasoline. only 28% of the gasoline goes into useful work by the force that keeps the car moving at constant speed despite friction. (see table 7.1 for the energy content of gasoline.) what is the force exerted to keep the car moving at constant speed?
The force exerted to keep the car moving at constant speed is 7.179 x 10^-6 N.
The car is travelling at the velocity 25.0 m/s and it travelled 109 km by using 2.0 gal of gasoline. First we need to find the energy consumed.
2.0 gallons = 2 x 3.785 liters/gallon = 7.57 liters of gasoline.
The total energy of this much gasoline will be = 7.57 liters x 34.0 MJ/liter = 256.38 MJ.
28% of the gasoline goes into useful work by the force that keeps the car moving at constant speed despite friction. i.e. 256.38 MJ x 28% = 71.79 MJ.
The distance travelled is 109 km. i.e. 109 km x 1000 m/s = 10^9 m.
Now to get the force, divide the energy used by the distance traveled, which is equal to 71.79 MJ / 10^9 m = 7.179 x 10^-6 N.
The force exerted to keep the car moving at constant speed is 7.179 x 10^-6 N.
Learn more about force:
https://brainly.com/question/30532395
#SPJ4
A 2270kg elephant climbs a pedestal 1.2m high during a circus act. What is the elephant's potential energy
The formula for potential energy is:
PE = mgh
Where:
m = mass of the object (in kilograms)
g = acceleration due to gravity (9.8 m/[tex]s^{2}[/tex])
h = height above a reference point (in meters)
So for the elephant:
PE = 2270 kg × 9.8 m/[tex]s^{2}[/tex] × 1.2 m
PE = 27424 kg [tex]m^{2}[/tex]/[tex]s^{2}[/tex]
The elephant's potential energy is 27,424 kg [tex]m^{2}[/tex]/[tex]s^{2}[/tex].
What is potential energy?A form of energy stored in an object as a result of its position or state is called potential energy. It is determined using the object's mass, height, and gravitational force. It is the energy that an object holds due to its height, position, or tension. A stretched rubber band has potential energy because of the strain within it, whereas a rock placed at the peak of a cliff has potential energy because of its height. When the object is released or changes state, the potential energy can be converted into kinetic energy, which is the energy of motion.
Potential energy (PE) can be calculated using the formula PE = mgh.
To know more about potential energy, check out:
https://brainly.com/question/1242059
#SPJ1
what resonant frequency would you expect from blowing across the top of an empty soda bottle that is 19 cm deep, if you assumed it was a closed tube?
The resonant frequency of a 19 cm deep soda bottle, if it were a closed tube, would be approximately 1798 Hz.
The resonant frequency of an air column in a closed tube can be calculated using the formula:
f = (v / 2L) * n
where:
v is the speed of sound in air (about 340 m/s)
L is the length of the air column
n is an integer representing the harmonic number (the first harmonic would be n=1, the second n=2, etc.)
For a 19 cm deep soda bottle, the length of the air column is half the length of the bottle, or L = 0.19 / 2 = 0.095 meters.
Using the formula, the first harmonic resonant frequency can be calculated as follows:
f = (340 / (2 * 0.095)) * 1 = 1798 Hz
So, the first resonant frequency of a 19 cm deep soda bottle, if it were a closed tube, would be approximately 1798 Hz.
To know more about Resonant frequency refer to-
brainly.com/question/13040523#
#SPJ4
Can someone please explain in detail how to do this problem?
The gravitational force between the cars is 2.92 x 10⁻⁵ N.
What is the gravitational force between the cars?
The gravitational force between the cars is calculated by applying Newton's law of universal gravitation as shown below.
F = ( Gm₁m₂ ) / ( R² )
where;
G is universal gravitation constantm₁ is the mass of one carm₂ is the mass of the second carR is the distance between the carsF = ( 6.67 x 10⁻¹¹ x 2,565 x 4,264 ) / ( 5² )
F = 2.92 x 10⁻⁵ N
Learn more about gravitational force here: https://brainly.com/question/72250
#SPJ1
raindrops fall 1700 m from a cloud to the ground. (a) if they were not slowed by air resistance, how fast would the drops be moving when they struck the ground? (b) would it be safe to walk outside during a rainstorm? compare the putative speed of the raindrops to the speed of a bullet traveling at 3x the speed of sound. (bonus: what happens in reality?)
(a) The raindrops would be moving at a speed of approximately 40.3 m/s if they were not slowed by air resistance.
(b) It would not be safe to walk outside during a rainstorm as the raindrops would be moving at a very high speed, much faster than a bullet traveling at 3x the speed of sound.
(Bonus) In reality, the raindrops are slowed by air resistance and their speed decreases as they fall to the ground, so the actual speed is much lower than the calculated value.
How does the speed of the raindrops compare to the speed of a bullet traveling at 3x the speed of sound?The speed of the raindrops without air resistance is much slower than a bullet traveling at 3x the speed of sound. A bullet traveling at 3x the speed of sound has a velocity of approximately 944 m/s, whereas raindrops without air resistance would have a velocity of approximately 50 m/s when they reach the ground. This significant difference in speed makes it clear that it would not be safe to walk outside during a rainstorm if the raindrops were not slowed by air resistance.
To know more about bullet traveling visit: https://brainly.com/question/4564257
#SPJ4