A flask weighs 43.50 g when it is empty and 105.50
g when filled with water. when the same flask is
filled to the same volume with another liquid, the
mass is 96.75 g. what is the density of the second
liquid? (the density of water is 1 g/ml.)

The absolute error that could be expected when measuring the half-life of radon-220 is 0.416 s

The following data were obtained from the question:

We can obtaine the absolute error as illustrated below:

Percentage error = (Absolute error / Actaul measurement) × 100

0.8% = Absolute error / 52

0.008 = Absolute error / 52

Cross multiply

Absolute error = 0.008 ×52

Absolute error = 0.416 s

Thus, the absolute error in measuring the half-life is 0.416 s

Learn more about error:

https://brainly.com/question/24202332

#SPJ1

During the breakdown of fatty acids, not all acetyl CoA enters the citric acid cycle, and your body converts some acetyl CoA to ketone bodies.

Acids are molecules or ions that can donate protons, known as Bronsted-Lowry acids, or form covalent bonds with electron pairs, known as Lewis acids. The first category of acids is proton donors or Brønsted-Lowry acids.

Blood is normally slightly alkaline, with a normal pH range of about 7.35 to 7.45. Normally, the body keeps blood pH near 7.40. Doctors measure a person's acid-base balance by measuring the pH of the blood and the levels of carbon dioxide (acid) and bicarbonate (base). No oil is either an acid or a base. Neutral. Oil is a neutral, nonpolar chemical. That is, it is a viscous liquid at room temperature. It is immiscible with water, but soluble in alcohol and ether.

Learn more about acid here

https://brainly.com/question/25148363

#SPJ4

The pH of buffer solution is 2.1225

We know that

pH = [tex]pK_a[/tex]   + [tex]log_1_0 \frac{[A]^{-} }{[HA]}[/tex]

In this question

[tex]pK_a[/tex] = 2.40

[tex][A]^{-}[/tex] = 4.75 mol

[HA] = 9 mol

Therefore putting values in formula

pH = 2.40 + [tex]log_1_0\frac{4.75}{9}[/tex]

pH = 2.40  + [tex]log_1_0[/tex] 0.52

pH = 2.40 - 0.283

pH = 2.1225

To know more about buffer

https://brainly.com/question/24262133

#SPJ4

At room temperature, the halogens show all the states of matter.

Halogens are the elements of the periodic table that belong to group number 17 and are non-metals. Fluorine and chlorine are gaseous at room temperature, bromine exists as liquid, whereas iodine and astatine are solid in nature. The halogens are highly electronegative and reactive in nature.

States of matter are the physical form in which a substance can exist. There are three states of matter: solid, liquid and gas. Fluorine and chlorine have weak forces of attraction between their molecules at room temperature, hence gaseous. Bromine has little stronger intermolecular force that prevents its evaporation and hence a liquid. The molecular weight of higher halogens is large with strong forces molecular forces and hence are solids.

To know more about halogens, here

brainly.com/question/11156152

#SPJ1

Ka for HX is 1.12×10⁻⁹.

Balanced chemical equation for the reaction of sodium hydroxide (NaOH) with weak acid (HX):

NaOH + HX ⇄ NaX + H2O

n(NaOH) = 0.10 mol; amount of sodium hydroxide

V = 1.00 L; volume of the solution

c(HX) = (0.3 mol - 0.1 mol) / 1.00 L

c(HX) = 0.2 M; concentration of a weak acid

c(NaX) = 0.1 M; concentration of a salt

pH = 8.65

Henderson–Hasselbalch equation: pH = pKa + log(cs/ck).

8.65 = pKa + log(0.1 M / 0.2 M)

8.65 = pKa - 0.30

pKa = 8.95

Ka = 10∧-8.95

Ka = 1.12×10⁻⁹; the acid dissociation constant

Buffer is a solution that can resist pH change upon the addition of an acidic or basic components and it is able to neutralize small amounts of added acid or base, pH of the solution is relatively stable.

This buffer is example of weak acid (HX) and its conjugate base (X⁻).

More about buffer: brainly.com/question/4177791

#SPJ4

The reaction best illustrates the behavior of the weak base h₂po₄- in an solution is:H₂PO₄ (aq) + H₂O (l) ↔ H₃PO₄ (aq) + OH- (aq)

What is a weak base?

A weak base is a base that, upon dissolution in water, doesn't dissociate completely, therefore the resulting aqueous solution contains only a small proportion of hydroxide ions and the concerned basic radical and a large proportion of undissociated molecules of the base.

Contents 1 pH, Kb, and Kw 2 Percentage protonated 3 A typical pH problem.

Examples of Weak Bases.

Ammonia (NH₃) Ammonia could also be a chemical compound with the formula NH ₃. it is a weak base which exists as a colour less gas under standard conditions for ...

2 Trimethylamine (N (CH₃) ₃)₃ Pyridine

Learn more about weak bases:

brainly.com/question/20016996

#SPJ4

The volume measurements won't be accurate and will be either less than or more than the anticipated figure if the graduated cylinder is accurately calibrated (depending on if the error in calibration is higher or lower). Depending on the calibration error, the calculated value may be higher or lower than the real value.

What is calibration?

Setting up an instrument so that it can generate findings for samples that fall within a tolerable range is part of the calibration process. A key component of instrumentation design is eliminating or reducing conditions that lead to faulty measurements.

Calibration attempts to reduce any measurement uncertainty by confirming the precision of test apparatus. In measuring procedures, calibration quantifies and reduces mistakes or uncertainties to a manageable level.

To learn more about calibration click the given link

https://brainly.com/question/525672

#SPJ4

A 2. 50 x 10-3 kg sample of oxygen gas at 31. 0 °c has an average molecular velocity of 487 m/s then ke of the gas is 5,929.225 J

Here we have to find kinetic energy of gas and sample is given as 2. 50 x 10-3 kg and velocity of 487 m/s so, formula to find kinetic energy is:

KE=1/2mv²

KE=1/2×2. 50 x 10⁻³×(487)²

KE=5,929.225kgm²/s²

Here 1 joule = 1 kgm²/s² so

1×5,929.225=5,929.225 J

Know more about kinetic energy

https://brainly.com/question/28496696

#SPJ4

3.63g of O2 is consumed in the combustion of 1.00 g of propane.

Propane, c3h8, is a common fuel used for cooking and home heating.

            C3H8 + 502---> 3CO2 + 4H20.

The combustion equation must first be balanced as illustrated above. The law of constant proportions can then be used to deduce that for every 1 mol of C3H8, there will be 5 mol of O2.

Using significant figures,

1 mol C3H8 -------> 44 g

1  mol O2 ------> 32g x 5 = 160

                    = 160/ 44g

160g/44g= 40/11  = 3.63g.

= 3.63g of O2  is consumed in the combustion of 1.00 g of propane.

Learn more about Propane here:

https://brainly.com/question/11697104

#SPJ4

Fatty acids that have been chemically altered so that hydrogen atoms are on opposite sides of a double bond are called trans fatty acids.

What are fatty acids?

Fatty acids are the building blocks of fat found in both our food and our body. During digestion, the body transforms lipids into fatty acids so they may be absorbed into the bloodstream. Three fatty acid molecules are joined together to form a molecule called a triglyceride.

Saturated, monounsaturated, and polyunsaturated fatty acids are all present in dietary fats. Even while meals include all three forms of fatty acids, they are frequently grouped according to the prevalent type.

To learn more about fatty acid click the given link

https://brainly.com/question/17352723

#SPJ4

Answer:

Thomson used creativity to interpret the results of the cathode ray tube experiment. Explain how the atomic theory was modified from Dalton's theory to Rutherford's.

A chemical change is one that leads to the formation of a new substance. It involves the rearrangement of the atoms in a substance to produce a new substance(s).

A physical change does not involve the rearrangement of atoms. It does not also lead to the formation of new substance. The changes are as follows;

Learn more about chemical change:https://brainly.com/question/23693316

#SPJ1

Deposition, when a diamond film forms on a surface from gaseous carbon atoms in a vacuum, a gas changes directly into a solid.

Depositions typically take place in attorneys' offices rather than in courtrooms. A court reporter will record the entire deposition word-for-word while the lawyers interrogate the witness, or deponent, about details of the lawsuit and other events.

The reporter is present throughout the session and will create a transcript at a later time. A deposition could also be videotaped. This is typically done when the deponent is so very ill and may not be well enough for trial, or whether the deponent will be out of town or unavailable during trial.

Learn more about deposition

https://brainly.com/question/12399171

#SPJ4

According to Bohr's model, electron emit electromagnetic radiation when  an electron moves from the higher energy orbit to the lower energy orbit of an atom.

Niels Bohr (1885–1962) proposed a model for the hydrogen atom that explained its atomic emission spectrum.

According to the Bohr model of the atom:

1. Energy levels of electrons are discrete (certain discrete values of energy), that is why hydrogen shows discrete, bright, colored lines.

2. Electrons orbit the nucleus in orbits that have a set size and energy.

3. Electrons can jump from one energy level to another, absorbing or emitting electromagnetic radiation with a frequency ν (energy difference of the levels).

More about Bohr's model: brainly.com/question/18002213

#SPJ4

1.07×10³Hz  frequency become if the person's breathing passage were filled with helium instead of air

Here, air temp is taken as 37.0°C if the person's breathing passage were filled with helium instead of air then we find out velocity of sound in the helium. here velocity of sound in the helium for 0°C is 965m/s

formula for velocity of sound in the helium :

Vw he=Vw at 0°C×√T/273

Whereas Vw he=965×√273+37/273  

Vw he=1028m/s

Here we find frequency so fundamental freq=fundamental harmonic no 1(velocity/4(length of tube)

=1(1028/4×0.24)

f=1.07×10³Hz

Know more about frequency

https://brainly.com/question/28498951

#SPJ4

0.6 moles molecules of dichlorine monoxide were present before the decomposition.

Balanced chemical equation for reaction of gaseous dichlorine monoxide decomposes to chlorine and oxygen gases:

2Cl₂O → 2Cl₂ + O₂

n(O) = 12 × 0.050 mol

n(O) = 0.6 mol; number of oxygen atoms

n(O) : n(O₂); ratio of oxygen atoms to oxygen molecules (see the picture below)

n(O₂) = 0.6 ÷ 2

n(O₂) = 0.3 mol; amount of oxygen molecules

n(O₂) : n(Cl₂O) = 1 : 2; from balanced equation

n(Cl₂O) = 2 × 0.3 mol

n(Cl₂O) = 0.6 mol; amount of dichlorine monoxide

More about decomposition: brainly.com/question/14539143

#SPJ4

Explanation:

The graphite anodes are suspended into the brine. During electrolysis, Cl ions are oxidized at the anode and chlorine gas goes out of the cell, while sodium ions are reduced at the mercury cathode forming sodium amalgam. ... Hydrogen gas is obtained as a by–product at the cathode.

The number of atoms in 259 g of C₁₂H₂₁O₉ is 45 x 10²³ oxygen.

The molar mass of many compounds can be calculated by dividing the mass of the compound by the number of moles of the compound.

Given the molar mass is 309.29 g/mol

Given weight= 259g

number of moles = mass / molar mass

259g / 309.29g/mol =0.837mol

1 mol contains 6.022 x 10²³ molecules

0.837 mol contain 6.022 x 1023 x 0.837 = 5.0 x 10²³ molecules

1 molecule of C₁₂H₂₁O₉ contains 9 oxygen atoms

5.0 x 10²³ molecules of C₁₂H₂₁O₉ contain 9x 5 x 10²³ oxygen atoms.

=45 x 10²³ oxygen atoms

Thus, the number of atoms in 259 g of C₁₂H₂₁O₉ is 45 x 10²³ oxygen atoms

To learn more about molar mass, refer to the link:

https://brainly.com/question/22997914

#SPJ4

Answer:

Explanation: your the best

Answer:

It will cost $35.5602

Explanation:

$2.459 /6.5 (mpg) = 0.3783 (cents per mile)

$0.3783 (cost per mile) * 94 (total miles) = $35.5602 total

There are 94,608,000 seconds using conversion factor in 3 years.

First, let's calculate the number of seconds in 1 year, and then multiply it by 3 to get the total number of seconds in 3 years.

Conversion factors:

1 year = 365 days

1 day = 24 hours

1 hour = 60 minutes

1 minute = 60 seconds

Step 1: Calculate the number of seconds in 1 year.

[tex]\[\text{1 year} = 365 \text{ days} \times \left(24 \text{ hours/1 day}\right) \times \left(60 \text{ minutes/1 hour}\right) \times \left(60 \text{ seconds/1 minute}\right)[/tex]

Step 2: Calculate the number of seconds in 3 years.

[tex]\[\text{3 years} = 3 \times \left(365 \text{ days} \times \left(24 \text{ hours/1 day}\right) \times \left(60 \text{ minutes/1 hour}\right) \times \left(60 \text{ seconds/1 minute}\right)\right)\][/tex]

Now, let's perform the calculations:

1 year = 365 * 24 * 60 * 60 seconds

          = 31,536,000 seconds

3 years = 3 *31,536,000

            = 94,608,000 seconds

So, there are 94,608,000 seconds in 3 years.

Learn more about Unit Conversion here:

https://brainly.com/question/28600662

#SPJ7

Answer:

7.6410^-14 grams N2O4

Explanation:

I will assume that "contains a billion (1.00 × 10º)" is meant to read "(contains a billion (1.00 × 10^9)."

One mole of anything contain 6.02x10^23 particles of that thing (atoms, molecules, paper clips, suns, etc.).  If there are 1.00x10^9 particles of N2O4, we have:

(1.00x10^9 particles N)/(6.02x10^23 particles/mole) = 1.66x10^-15 mole of N atoms

Each mole of N2O4 contains 2 moles of N atoms:  

(1 mole N2O4)/(2 moles N atoms)

(1.66x10^-15 mole of N atoms)*(1 mole N2O4)/(2 moles N atoms) =

8.31x10^-16 moles N2O4

The molar mass of N2O4 is 92.01 g/mole.

(8.31x10^-16 moles N2O4)*(92.01 g/mole) = 7.6410^-14 grams N2O4

When a cell is placed in a solution with a very low solute concentration, water diffuses into the cell. such a solution is called a hypotonic solution. Subtract the solute's mass from the total volume of the solution.  Divide the figures you found for mass and volume to find the concentration of your solution.

The overall solute concentration of a solution is described by its osmolarity. A solution with a low osmolarity has more water molecules than solute particles; a solution with a high osmolarity contains fewer water molecules than solute particles. Solute concentration is defined as the amount of solutes and particles dissolved in a solution.

To learn more about concentration, click here.

https://brainly.com/question/10725862

#SPJ4

Answer:

Carbon can not gain or lose protons because it has 4 electrons.

Explanation:

A reasonable synthetic strategy for the synthesis of 4-methyl-1,4-pentanediol from methyl-4-hydroxybutanoate hoch2ch2ch2cooch3 and the reaction is Grignard reagent

Here in the Grignard reagent reaction chemical compound with the generic formula R-Mg-X where X is halogen  and R is organic group and grignard reaction is the organometallic chemical reaction in which alkyl, allyl, or magnesium halide in the synthesis of that compound 4-methyl-1,4-pentanediol from methyl-4-hydroxybutanoate hoch2ch2ch2cooch3

Synthetic strategy for the synthesis of 4-methyl-1,4-pentanediol from methyl-4-hydroxybutanoate reaction are followed:

It is false that 3-hydroxybutanal can exist in equilibrium as a cyclic hemiacetal.

Hemiacetal is produced when one molecule of aldehyde and one molecule of alcohol react.

3-hydroxybutanal (see the structure in the picture below) has both carbonyl and hydroxyl group, so it can, theoretically, undergo an intramolecular reaction to form a cyclic hemiacetal in aquatic solution.

Stability of cyclic hemiacetals depends on the size of the ring. Five or six membered rings are generally favored.

If 3-hydroxybutanal form a cyclic hemiacetal, it will have four membered ring, so it will be very unstable. It cannot exist in aquatic solution, while 4-hydroxybutanal can (see the picture below).

More about hemiacetals: brainly.com/question/2983055

#SPJ4

There is more traffic between 8 and 9 in the morning because most people start work at 9. this would be a(n) hypothesis.

A hypothesis is a tested assertion about the relationship between two or more variables or a proposed justification for an observed phenomenon in a scientific context. It helps make a connection to the guiding idea and specific study topic.

It supports data processing and evaluates the study's validity and reliability. It provides a base or further proof to back up the study's validity.

A hypothesis can be categorised as being straightforward, complex, or direction-based.

To learn more about hypothesis from given link

https://brainly.com/question/606806

#SPJ4

The mass defect of the oxygen nucleus is 16 8o 816o. the mass of neutral 16 8o 816o is equal to 15.994914 atomic mass units

8(1.008665)+8(1.007825)

=16.13192

16.13192-15.994914

=.13701 amu

The atomic nucleus is a small, dense region made up of protons and neutrons at the center of an atom, discovered by Ernest Rutherford in 1911, based on Geiger-Marsden's gold leaf experiment in 1909. After the discovery of the neutron in 1932, models of the nucleus composed of protons and neutrons were rapidly developed by Dmitri Ivanenko[1] and Werner Heisenberg. I was.

The cell nucleus carries genes, structures that control and regulate cell activity (such as growth and metabolism) and contain genetic information. Nucleoli are small bodies commonly found within the nucleus. The nucleoplasm is the gel-like matrix in which the core components are suspended.

Learn more about nucleus here

https://brainly.com/question/1268608

#SPJ4

A Polar covalent bond is formed by an unequal sharing of one or more electron pairs.

The bond formed by sharing of an electron pair between two atoms is known as covalent bond.

In a polar covalent bond  the atoms have an unequal attraction for electrons and so the sharing is unequal. Bond between Oxygen and Hydrogen in water molecule is one of the example of polar covalent bond.

In Non-Polar Covalent bond  the atoms have an equal attraction for electrons and so the sharing is equal. Bond between two Hydrogen atoms  in [tex]H_{2}[/tex] molecule is one of the example of non-polar covalent bond.

To Know more about Covalent Bond refer to the link:

https://brainly.com/question/3447218

#SPJ4

The energy of the carbide released is 7262.5MJ.

We know that the reaction between calcium  oxide and carbon occurs in accordance with the reaction; [tex]CaO(s)+3C(s)----- > CaC_{2} (s)+CO(g)[/tex]. The reaction is seen to produce 464.8kJ of energy per mole of carbide produced.

Number of moles of [tex]CaC_{2}[/tex] produced = 1000 * 10^3 g/64 g/mol

= 15625 moles of calcium carbide

If 1 mole of [tex]CaC_{2}[/tex] transfers  464.8 * 10^3 J

15625 moles of calcium carbide transfers 15625 moles  * 464.8 * 10^3 J/ 1 mol

= 7262.5MJ

Learn more about reaction enthalpy:https://brainly.com/question/1657608

#SPJ1

Answer:

it's the United states

Explanation:

because It has alot of tornadoes

A soluble impurity usually has two effects on the melting point of a compound: an increase in melting point range and a decrease in melting point.

In chemistry, there are two types of impurities: soluble and insoluble.

Soluble impurities are those that dissolve in water quickly and also have a significant impact on the chemical properties of a compound such as a significant increase or decrease in the melting point and boiling point.

For example, salt, milk, and sugar compounds are soluble impurities.

Similarly, insoluble impurities remain undissolved when mixed in water and are also known as suspended impurities.

Examples of insoluble impurities are sand, oil, chalk, rocks, pebbles, etc.

If you need to learn more about compounds click here:

https://brainly.com/question/26487468

#SPJ4