a bullet of mass 10 g strikes a ballistic pendulum of mass 2.0 kg.the center of mass of the pendulum rises a vertical distance of 12 cm.assuming that the bullet remains embedded in the penduluffi, calculate the bullet's initial speed.

No, they don't have the same acceleration because the thrown ball accelerates faster.

Acceleration is simply defined as change in velocity over time elapsed (a = Δv/t). An object is accelerating if it is slowing down, speeding up, or changing directions. Force can make objects accelerate. If an object is at rest or is moving at a constant velocity, then it's not accelerating.

Gravity in classical mechanics is defined as a type of force. Force of gravity is sometimes called weight. Weight is equal to mass times acceleration due to gravity (W = mg).

Both the ball and the rock are affected by Earth's gravity. However, since the ball's initial speed isn't zero, it moves faster than the dropped rock, and the ball will hit the ground first.

Learn more about acceleration at https://brainly.com/question/460763.

#SPJ4

Metals such as copper, aluminium, silver, and gold, graphite, electrolytes such as aqueous salt solutions, and semiconductors such as silicon and germanium are examples of materials that are typically good conductors of electricity.

The movement of electric energy or charge is known as electricity. It is a secondary energy source, meaning that we obtain it through the conversion of main energy sources like coal, natural gas, oil, nuclear power, and other natural sources. The flow of electrons between two places when there is a voltage differential between them constitutes electricity, which is a sort of energy that makes it possible to produce an electric current.

The electricity we use is a secondary energy source since it is produced by converting primary energy sources, such as coal, natural gas, nuclear energy, solar energy, and wind energy, into electrical power.  Despite being independent properties, voltage and current interact in electrical circuits. Both are necessary for the circuit to function properly. Current in a circuit flows due to the force of voltage.

To know more about Electricity visit:

https://brainly.com/question/8971780

#SPJ4

Answer:

If you drop a 1 lb ball from 10 ft in the air into sand and measure the size of the crater, and then a 10 lb ball from 10 ft in the air and measure the size of the crater, you would expect to see that the crater created by the 10 lb ball is larger than the crater created by the 1 lb ball. This is because the larger mass of the 10 lb ball will result in a greater impact force upon hitting the sand, which in turn will cause a larger excavation of the sand and thus a larger crater.

The best reason for using radio waves on animals is to locate where the animals are and to keep track of them.

VHF radio tracking, satellite tracking, and global positioning system tracking are the three types of radio tracking systems used by scientists. Radio waves are used as a method of tracking animals because they can travel over long distances, even through obstacles, and can be easily detected with a receiver.

Additionally, radio waves can be emitted continuously, allowing for continuous monitoring of the animal's location. This makes radio waves a convenient and effective means of tracking animals in many different environments.

Learn more on animal tracking here: https://brainly.com/question/3246159

#SPJ1

Answer:

B) the surface has a high coefficient of friction

When an object is not moving despite an applied force, it means that the frictional force is equal to or greater than the applied force. A high coefficient of friction indicates that the frictional force is strong, making it difficult to move the object. In this case, the frictional force is equal to the 100 N of force that Devon is applying, so the coefficient of friction for the surface must be high.

The three modes of heat transfer are conduction, convection and radiation. Conduction takes place in solids and convection takes place in liquids and gases. Radiation is the mode of heat transfer through vacuum.

Heat will transfer from a hotter region to the colder region due to the differential distribution of temperature. There are three modes of heat transfer namely conduction, convection and radiation. Conduction takes place in solids and convection takes place in liquids and gases. Radiation is the mode of heat transfer through vacuum.

Heat and light is reaching from the sun to earth by radiation. The ground is warming up through the conduction process. Similarly all the solid substances are heating up by conduction.

The water resources are warming up by convection currents, in which the hotter molecules rises above and make the whole liquid warm.

Find more on heat transfer:

https://brainly.com/question/13433948

#SPJ1

The cat spends equal amounts of time ascending and descending, it spends a total of approximately 0.449 s in the top 1 m of its jump.

To determine the time spent by the cat in the top 1 m, we need to find the time it takes to travel the first 1 m of its 3 m jump. The motion of the cat can be modeled as a vertical, projectile motion problem. The time it takes to travel a given vertical distance can be found using the formula:

[tex]$t = \sqrt{\frac{2d}{g}}$[/tex]

Where d is the vertical distance traveled and g is the acceleration due to gravity [tex](9.8 m/s^2)[/tex]. Plugging in d = 1m and g = [tex]9.8$ m/s^2[/tex], we find that the time it takes to travel the first 1 m is

[tex]$t = \sqrt{\frac{2 \cdot 1}{9.8}} = \sqrt{\frac{2}{9.8}} \approx 0.449s[/tex]

Read more about Acceleration:

https://brainly.com/question/27821888

#SPJ4

Whatever speed can the dart gain if it separates from spring when it hits its natural lengths (x = 0)? = 3.0 m/s in the horizontal, the spring's force was the only one acting on the dart (friction was ignored).

The greatest location, x=A, correspond to a velocity of zero, and the position with the maximum speed is x=0. The "initial condition" in t=0, where the mass is located at x=A and moving at v=0, corresponds to =0.Here the natural length of the spring is 35cm and the spring is compressed to 14cm in length. the force exerted on bow by the spring is 21cm/(100cm/m)=> F = 5.04N

The fastest-firing Nitro dart blaster is the N-Strike Elite HyperFire. With new batteries, this fully motorised blaster can fire up to 5 dart per second, allowing kids to pelt targets with a barrage of darts.

To know more about speed visit:

https://brainly.com/question/28224010

#SPJ4

Answer: 268 N

Explanation:

[tex]F_{spring} =k_{s} (L-L_{0})=-3350(0.02-0.10)[/tex]

A spring has a natural length of 10 cm then the work w (in j) is required to stretch it from 10 cm to 15 cm is 156.25 J.

We can use the formula for the work done by a spring: W = (1/2) k ([tex]x_{2}[/tex] - [tex]x_{1\\}[/tex]) where W is the work done, k is the spring constant, [tex]x_{2}[/tex]  is the final length of the spring, and [tex]x_{1\\}[/tex] is the initial length of the spring.

First, we need to find the spring constant. We can use the force applied and the extension of the spring to calculate it:

F = k([tex]x_{2}[/tex] - [tex]x_{1\\}[/tex])

25 N = k (20 cm - 10 cm)

k = 2.5 N/cm

Now we can use this value of k to calculate the work done to stretch the spring from 10 cm to 15 cm:

W = (1/2) (2.5 N/cm) ((15 cm)^2 - (10 cm)^2)

W = (1/2) (2.5 N/cm) (225 cm^2 - 100 cm^2)

W = (1/2) (2.5 N/cm) (125 cm^2)

W = 156.25 J

To know more about work here

https://brainly.com/question/25573309

#SPJ4

The kinetic energy of the ball of 0.0520 kg with a velocity of 10 m/s is 2.6 J. The speed of the ball when it hits the ground will be 15.3 m/s.

Kinetic energy of an object is the energy generated by virtue of its motion. It is related to the mass and velocity as follows:

Ke = 1/2 mv²

Given that, m = 0.0520 kg

velocity v= 10 m/s

then Ke = 1/2 × 0.0520 Kg × (10 m/s )² = 2.6 J.

The kinetic energy of the ball when  it hits the ground will be equal to the potential energy. Then, the speed of the when it hits the ground is calculated as:

v =√2gh

v = √(2 × 9.8 m/s 12 m)

  = 15.3 m/s.

Therefore, the speed of the ball when it hits the ground will be 15.3 m/s.

Find more on kinetic energy:

https://brainly.com/question/26472013

#SPJ1

A machine can increase force,  change force direction, increase velocity.

A machine is a physical system that use power to exert forces, regulate movement, and carry out an action. The phrase is frequently used to refer to both manmade devices that use engines or motors as well as natural biological macromolecules like molecular machines.

To make the process easier, machines are utilized. In general, it is believed that machines enhance the quantity of work done in order to do the task quickly. However, this is untrue because energy is a form that can only be transferred, not created or destroyed, as work is a form of energy.

Learn about machine https://brainly.com/question/13778718

#SPJ1

The Foundation's namesake, Dr. Martha Ripley, was an ardent supporter of expert medical treatment for both married and unmarried mothers and their newborns.

Since its founding in 1957, Ripley's grantmaking has focused on the welfare of women and children. Dr. Ripley was instrumental in starting the Minneapolis Maternity Hospital in 1886 and stayed involved in its issues until her death in 1912.

The facility, which was subsequently given the name Ripley Memorial Hospital, was the first in the city to establish a social services department, provide lessons on parenting and natural delivery, and allow young children to "room in" with their mothers.

The hospital's board decided to form the Ripley Memorial Foundation and donate the proceeds from the sale when it closed in 1956.

Therefore, The Foundation's namesake, Dr. Martha Ripley, was an ardent supporter of expert medical treatment for both married and unmarried mothers and their newborns.

To learn more about memorial fund, refer to the link:

https://brainly.com/question/18079288

#SPJ1

When the light beams that have been reflected or refracted actually touch after reflection or refraction, a true image is created. On a screen, an actual image can be obtained.

projection screen, a surface used to display an optical projector's picture. The main criteria for materials to be used as screens is a high level of reflection. The lenticular, glass bead, and mat white screens are the three most popular kinds of screens.

To generate a picture visible to a human eye, pixels on electrical devices can emit light, filter light, or reflect light. Here is an output from a laser printer that has been enlarged. The output of an inkjet printer printer is magnified below. The dots that make up the finished image can be seen.

To know more about reflection visit:

https://brainly.com/question/15839646

#SPJ4

With both eyes open, the blind spots are not perceived because the visual fields of the two eyes overlap. Indeed, even with one eye closed, the blind spot can be difficult to detect subjectively because of the ability of the brain to “fill in” or ignore the missing portion of the image.

The optically transparent aqueous humour, lens, and vitreous body are all enclosed by three coatings that make up the eye. The cornea and sclera make up the outermost coat, while the choroid, ciliary body, and iris make up the intermediate coat and, from the rear to the front, the major blood supply to the eye.

Due to the fact that both eyes' fields of vision overlap, the blind spot is ignored and does not result in a blind spot in the visual field. Additionally, even with one eye closed, the brain has the capacity to ignore or make up for the affected area.

Learn more about Eyes here:

https://brainly.com/question/1835237

#SPJ4

To hit the target with the crate of supplies, the crew should drop the crate when the plane is directly over the target.

This is because the crate will be initially moving with the same horizontal velocity as the plane. When dropped, the crate will begin to fall vertically due to the force of gravity,

Gravity is a fundamental force in the universe that causes objects to be attracted to each other. It is the force that governs the motion of planets, stars, and galaxies, and is responsible for keeping them in their orbits.

According to the theory of gravity proposed by Sir Isaac Newton, every object in the universe exerts a gravitational force on every other object, with the strength of the force depending on the mass of the objects and the distance between them. This force is proportional to the product of the masses of the two objects, and inversely proportional to the square of the distance between them

To know more about gravity here

https://brainly.com/question/557206

#SPJ4

Answer:

Below

Explanation:

The vaulter's entire KE will be converted to PE to clear the bar (5-.9) = 4.1 m above the COM.

PE required = mgh = 70 ( 9.81)(4.1) = 2815.5 J

KE required will then be   2815.5  J

(As an aside:  = 1/2 mv^2 = 2815.5 = 1/2 ( 70)(v^2)   shows v = 9  m/s)

The statement of equipotential lines passing through a point perpendicular to the direction of the electric field at that point is true.

Equipotential fields are fields where every point in the field has the same electric potential. For an electric charge, the equipotential field is a spherical shell and the electric field lines are radial and always perpendicular to the equipotential field. Any electric charge transferred in the equipotential field requires no work.

In mathematics and physics equipotential refers to a region in space where every point in it has the same potential. In electricity, it can be defined as the position of points that have similar potential values. Equipotentials are often referred to as equipotential surfaces or fields, namely fields that have a set of points that are spread continuously and have similar potentials.

Learn more about equipotential at: brainly.com/question/14908372

#SPJ4

Two trains on the separate tracks move toward each other. Train 1 has speed of 123 km/h, train 2, speed of 66 km/h. Train 2 blows its horn, emitting a frequency of 560 hz. The frequency heard by the engineer on train 1 is 662.41 Hz.

Train 1 (observer) :

Speed = 109 km/h = 30.2 m/s

Train 2 (source) :

Speed = 99 km/h = 27.5 m/s

Train 2 emitting frequency = 500 Hz

The expression is as follows :

F = F' ( v + v1 / ( v - v2 )

Where

F' = 560 Hz

v is velocity of sound = 343 m/s

v1 = 30.2 m/s

v2 = 27.5 m/s

Frequency  = 560 ( ( 343 + 30.2 ) / 343 - 27.5 ))

Frequency = 560 × (373.2 / 315.5)

Frequency = 662.41 Hz

To learn more about frequency here

https://brainly.com/question/13201008

#SPJ4

The answer is option A, B, and D.

Mesoamerican civilizations used astronomy in many aspects of their everyday lives. They developed calendars based on the movement of stars and planets, using observations to determine the seasons of the year and to track the cycles of agricultural planting and harvesting. They also used the movement of stars and planets to track animal herds, as the migration patterns of animals were closely tied to astronomical events.

Additionally, their beliefs about astronomy were closely tied to their religious practices, and they used their understanding of astronomy to predict the future and make decisions about important events such as wars, marriages, and trade. The study of astronomy was an integral part of the daily life of Mesoamerican civilizations and played a key role in their cultural, economic, and political development.

Complete question is provided in the image below.

Read more about Archaeoastronomy:

https://brainly.com/question/14569626

#SPJ4

A fair general rule is that if a shock reaches 2,700 volts or more, the victim frequently dies or sustains serious injuries. When the voltage reaches above 11,000 volts, a victim typically dies.

Electrical engineering professor at the University college San Diego, Dr. Michael S. Morse, says but while 10,000 volt can be lethal in some situations, it is also feasible that something could have 10,000 voltages behind it and yet be reasonably safe.

Personnel would never print and post warning signs warning of danger from high voltage if the voltage posed no threat. In general, the idea that "current kills" is true. Electric current is what causes cardiac fibrillation, muscle freezing, and tissue burning.

To know more about electricity visit:

https://brainly.com/question/12791045

#SPJ4

The angular acceleration for the potter's wheel is 0.012 rad/s².

The equation for angular velocity with constant angular acceleration is given by:

ωf = ωi + αt

where ωf is the final angular velocity, ωi is the initial angular velocity (which is 0 in this case), α is the angular acceleration, and t is the time.

Plugging in the given values, we have:

0.30 rad/s = 0 + α x 25.0 s

Dividing both sides by 25.0 s, we get:

α = 0.30 rad/s / 25.0 s = 0.012 rad/s²

So the angular acceleration is 0.012 rad/s².

Learn more on angular acceleration here: https://brainly.com/question/21278452

#SPJ1

(a) The relative velocity of Girl  relative to the surface of the ice is given by: v = (1.50 m/s) * (45 kg / 195 kg) = 0.45 m/s

(b) The velocity of the plank relative to the surface of the ice is given by: v = (1.50 m/s) - (0.45 m/s) = 1.05 m/s

(a) To find the velocity of the girl relative to the surface of the ice, we must consider the motion of the plank.

The plank and the girl have a combined mass of 150 kg + 45 kg = 195 kg.

Since the girl is walking to the right at 1.50 m/s relative to the plank, her velocity relative to the surface of the ice is given by:

v = (1.50 m/s) * (45 kg / 195 kg) = 0.45 m/s

(b) To find the velocity of the plank relative to the surface of the ice, we must subtract the velocity of the girl relative to the surface of the ice from the velocity of the girl relative to the plank.

The velocity of the plank relative to the surface of the ice is given by:

v = (1.50 m/s) - (0.45 m/s) = 1.05 m/s

For more questions on plank relative

https://brainly.com/question/13067704

#SPJ4

The speed v of the piece of ice as it passes over the top of the hill if the normal force exerted on it at this point is half its weight is [tex]v= \sqrt{\dfrac{gr}{2}}[/tex].

During the sliding over the top of the hill, the forces acting upon the piece of ice are gravitational force, [tex]F_g[/tex] = mg toward the ground,

and centrifugal force is given by [tex]F_c = \dfrac{mv^2}{r}[/tex]  acting from the ground,

so the total normal force exerted on it at this point (toward the ground) is half its weight, [tex]F_n = \dfrac{1}{2} mg[/tex].

Using the Newton's second law of motion,

[tex]\dfrac{1}{2} mg = mg - \dfrac{mv^2}{r}[/tex]

Solving this,

[tex]v= \sqrt{\dfrac{gr}{2}}[/tex]

To know more about the Newton's law of gravitation, here

brainly.com/question/13447525

#SPJ4

The method by which machines increase range of motion and speed of movement so that resistance can be moved farther or more quickly than an applied force is not described in the following.

The earth pulls your body downward, which is known as gravity. The location where your body's mass is concentrated is known as your center of gravity. A hypothetical location where the force of gravity seems to act is the center of gravity (COG) of an organism.

No relative motion exists between the two contact surfaces in a rolling motion. Therefore, in a rolling motion, the friction does not do any work. Because of this, rolling friction is lower than sliding or kinetic friction.

To know more about resistance visit:-

https://brainly.com/question/2285158

#SPJ4

v truck equals 2.10 m/s^2 * t(v=velocity)

v car equals 3.40 m/s^2 * t.

In order to obtain the solution, we can lastly enter the known value of d = 60.0 m:

Sqrt(2 * 60.0 m / (3.40 m/s^2 - 2.10 m/s^2) yields t = 5.14 s.

v truck is equal to 2.10 m/s^2 * 5.14 s, or 10.67 m/s.

17.87 m/s is equal to v car = 3.40 m/s^2 * 5.14 s.

With a speed of 17.87 m/s and a truck speed of 10.67 m/s, respectively, the vehicle passes the truck after 5.14 seconds.

An object's rate of change in position in a certain direction is described by a vector quantity called velocity. Its formula is the product of the positional change and the time change. In other terms, velocity refers to a direction in which an object is moving at a certain speed. Meters per second (m/s) or any other measure of distance travelled in a given amount of time can be used to describe velocity. When describing the motion of objects in various contexts, such as the movement of planets and stars or that of projectiles and vehicles, velocity is a key notion in physics. The forces acting on an object and its acceleration can cause its velocity to fluctuate over time. being aware of speed

Learn more about velocity here:

https://brainly.com/question/18084516

#SPJ4

Distance traveled in a given amount of time is equal to the average speed. utilizing the formula s=ut+21at2s=510+212102s=50+100=150m.

By understanding how far an object is from us, we may calculate its actual size. It is possible to calculate the space that an object takes up in the sky. The actual size of an object can then be determined by taking into account its distance. The further away something is, the smaller it appears.

A common metric length from around three feet, 3 inches is called a metre. This proves that in the metric system, a meter is a measuring unit. Objects up to one meter in length include yardsticks, baseball bats, and guitars. Distances in sporting events like run and swimming are also measured in meters.

To know more about average visit:

https://brainly.com/question/12322912

#SPJ4

The angle of take-off relative to the horizontal is 70.97 ° and the magnitude of the resultant velocity vector is 9.99 m/s.

The horizontal velocity = 9.47 m/s

The vertical velocity = 3.21 m/s

The resultant velocity is expressed by using Pythagoras as follows :

Resultant Velocity , V = √ Vx²  +  Vy²

Resultant Velocity , V = √ (9.47 m/s )² + ( 3.21 m/s)²

Resultant Velocity , V  = 9.99 m/s

The angle of take - off :

tan Ф = Vy / Vx

Ф = tan⁻¹ ( 9.47 / 3.21 )

  = 70.97 °

Thus, the angle is 70.97 ° .

To learn more about velocity here

https://brainly.com/question/27805224

#SPJ4

Size and SA:V are inversely related for a certain form. The ratio of a cube with sides of 2 cm is 3 cm1, which is half of a cube with sides of 1 cm.

The area is the area occupied by a this double flat surface. It has a square unit of measurement. A three-dimensional object's surface area is the area occupied by its outside surface.

A 3D object's surface is the entire area that all of its faces cover. For instance, the surface area of a cube is its amount if we wish to determine how much paint is needed to paint it. It is consistently expressed in square units.

To know more about surface area visit:

https://brainly.com/question/16415229

#SPJ4

Electrons lose energy when they pass through the proteins that exist between PSII and PSI. This energy is utilised to transport hydrogen atoms from the stroma to the thylakoid lumen.

As soon as electrons are lost, each photosystem is replenished with electrons from another source. The PSII reactive center receives electrons from water, but the PSI reactive center fills with electrons flowing down the electron transport chain from her PSII.

Two electrons lost from photosystem II are replaced by water molecule fission. Breaking down water also releases hydrogen ions into the lumen. This contributes to a hydrogen ion gradient similar to that produced by mitochondrial electron transport. Electrons move via a succession of proteins from photosystem II. This electron transport system uses the energy of electrons to drive hydrogen ions into the interior of the thylakoid.

For more information on photosystem , visit :

https://brainly.com/question/29462433

#SPJ4