a barometric pressure of 1021.0 millibars is equal to how many inches of mercury?

The given sentence indicates that the compound's empirical formula is CH2.

Any portion of a molecule and consists of 2 hydrogen atoms bonded to a carbon, which is related to the rest of the protein by two bonds, is known as a methylene group in organic chemistry. The group can be written as CH 2, with the two bonds denoted by the ".

why we occasionally write ch2 and occasionally h2c. CH2 and H2C are identical to one another. Although they both relate to the same entity, CH is sometimes written as H in molecular structures.

To know more about CH2 visit:

https://brainly.com/question/27996213

#SPJ4

The pile of firewood  does not immediately release the energy in its chemical bonds because activation energy is higher in case of solids where forces of attraction is maximum.

Forces of attraction  is a force by which atoms in a molecule  combine. it is basically an attractive force in nature.  It can act between an ion  and an atom as well.It varies for different  states  of matter that is solids, liquids and gases.

The forces of attraction are maximum in solids as  the molecules present in solid are tightly held while it is minimum in gases  as the molecules are far apart . The forces of attraction in liquids is intermediate of solids and gases.

Learn more about forces of attraction,here:

https://brainly.com/question/23841038

#SPJ1

The force of the 300kg car moving with an acceleration of 10m/s² is 3000N.

Force in physics refers to a physical quantity that denotes ability to push, pull, twist or accelerate a body.

The force of a body can be estimated by multiplying the mass of the body by its acceleration as follows:

Force = mass × acceleration

In this question, a 300kg car is said to be moving at an acceleration of 10m/s². The force is estimated as follows:

Force = 300kg × 10m/s²

Force = 3000N

Learn more about acceleration at: https://brainly.com/question/1046166

#SPJ1

Tert-butyl alcohol (TBA), the solvent, has a practical melting point (23–26 °C)1 and a relatively high value for kf, 8.09 kg/C/mol.

The tertiary alcohol having the simplest formula, (CH3)3COH, is tert-butyl alcohol . Tertiary alcohol, formula, and 1-butanol are some of its isomers. Tert-butyl alcohol is still a colourless solid that melts at or just below room temperature with a smell similar to that of honey.

To be announced (TBA), to just be confirmed (TBC), to really be determined or decided upon (TBD), to be declared (TBD), or other variations are placeholder terms use it very broadly throughout event management to indicate that while something will be scheduled or expected to occur, a specific detail of that is still to be fixed or set.

To know more about Tert-butyl alcohol visit:

https://brainly.com/question/29493073

#SPJ4

Given: mass of sodium hydrogen carbonate = 3.8 g

mass of acetic acid = 10.5 g

Mass of reactants = mass  of sodium hydrogen carbonate & mass of acetic acid = 3.8 + 10.5 = 14.3 g

Mass of reactants = Mass of products in reaction vessel + mass of carbon dioxide (as it escapes)

Mass of carbon dioxide = 14.3 - 12.0 =2.3 g

Thus the mass of carbon dioxide released during the reaction is 2.3

Mass cannot be created or destroyed, under the law of conservation of mass. As a result, the mass of reactants and products must be equal. Each element must have an equal number of atoms on both the reactant and product sides of the reaction. Chemical equations are balanced as a result.

Learn more about Reactants here:

https://brainly.com/question/12250842

#SPJ4

Answer:

0.0526 gallons

Explanation:

Here is another way to set up the solution.  (It will give the same answer as Michael's solution.) w = number of gallons of pure waterYou have 1 gallon of pure antifreezeYou want 95% antifreeze in 1+w gallons You can do a weighted combination of concentrations of antifreeze. (0%)(w) + (100%)(1) = (95%)(1 + w) 100 = 95(1 + w) w = 100/95 - 1 ≅ 0.0526 gallons

Answer:

The answer is A I think sorry if I'm wrong

Considering the number of the particles and the molality 0.20m Na3PO4 would lower the melting point the most.

Colligative properties are the physical properties of solutions that depend on the number of solute particles in a given amount of solvent, but not on their chemical nature. Examples of colligative properties include boiling point elevation, freezing point depression, osmotic pressure, and vapor pressure lowering.

Since 0.20m Na3PO4  has the most number of particles then it would lower the melting point the most.

Learn more about melting point:https://brainly.com/question/29578567

#SPJ1

An accurate description of ionic bonding is atoms of different elements, having gained or lost electrons, form negative and positive ions that are bonded together by attractive forces between ions with opposite charges (B). 

The answer choices should have as follow :

A. atoms of two different elements share electrons and protons; the resulting compound is bonded together by the strong, binding energy of shared protons.

B. atoms of different elements, having gained or lost electrons, form negative and positive ions that are bonded together by attractive forces between ions with opposite charges.

C. nuclei of bonding atoms exchange electrons; the resulting ions are bonded together by the attractive forces between the negative and positive nucleons. 

D. nuclei of two different atoms share electrons, and the resulting compound is tightly bonded by the very strong, induced, electronuclear bonds.

The ionic bonding is formed from electrostatic attraction between the two ions which oppositely charged. In specific, there is a transfer of some electrons (outermost) from one atom to another. If the atom loses the electrons, it results in a positively charged ion or cation. Meanwhile, if the atom gaining one or more electron, it becomes an anion or a negatively charged ions.

Sodium chloride (NaCl) is an example of ionic bonding. An atom of sodium (Na) donates one of its electrons to an atom chlorine (Cl) and resulting positive ion (Na+) and negative ion (Cl-) become a stable compound. 

Thus,  the correct option is B, because only electrons that are shared. 

Learn more about ionic bonding by clicking this link :

https://brainly.com/question/11527546

#SPJ4

The evaluation of the model and the real house using unit rate indicates that we get;

A unit rate is the rate at which one item of a product or service is valued.

1) The model's weight that will be used to calculate the weight of the real house is required

Whereby the model weight is 3,333 lbs, we get

Model weight = 3,333 lbs

The number of models that are equivalent to the real house = 123 model  units

Weight of the real house = 123 × 3,333 lbs = 409,959 lbs

2) The weight a regular balloon can lift = 0.036 lbs

The number of balloons that would lift the model is therefore;

3,333 lbs ÷ 0.036 lbs/balloon ≈ 85,462 balloons

The number of balloons that would lift the house is therefore;

409,959 lbs ÷ 0.036 lbs/balloon = 11,387,750 balloons

3) The volume of helium in one balloon = 0.52 cubic feet

The volume of helium that would be needed to lift the model is therefore;

85,462 balloons × 0.52 cu. ft./balloon = 44440.24 cu. ft.

The volume of helium that would be needed to lift the real house can be found as follows;

11,387,750 balloons × 0.52 cu. ft./balloon = 5921630 cu. ft.

4) The formula for the radius of the sphere is; R = ∛(0.75·V/π), where;

V = The volume of the balloon or the gas it contains

Therefore, for the model, we get;

V = 44440.24 cu. ft., therefore;

R = ∛(0.75 × 44440.24/π) ≈ 21.97 feet

The radius for the balloon for the model: 21.97 feet

The diameter = 2 × 21.97 ≈ 43.95

The diameter for the balloon for the model is about 43.95 feet

The values for the balloon for the real house are;

R = ∛(0.75 × 5921630/π) ≈ 112.23

The radius of the balloon for the real house: 112.23 feet

Diameter ≈ 2 × 112.23 = 224.46

The diameter for the balloon for the real house is about 224.46 feet

5) The number of balloons that an helium tank can fill = 600 balloons

The number of tanks of helium needed to fill the balloons that will lift the model are therefore;

85,462 balloons/(600 balloons/tank) ≈ 143 tanks

(The above value is obtained by rounding up)

The tanks needed to lift the model = 143 tanks of helium

The number of tanks needed for the real house is found as follows;

11,387,750 balloons/(600 balloons/tank) ≈ 18979.53 tanks

6) The cost of the renting the extra large tank of helium to lift the model and the real house can be found as follows;

The unit rate for the cost of renting one tank = $250

The cost of helium to lift the model is therefore;

143 tanks × $250/tank = $35,750

The cost to lift the real house can be found as follows;

18979.53 tanks ≈ 18980 tanks

Cost ≈ 18980 tanks × $250/tank = $4,745,000

The cost to lift the real house is about $4,745,000

7) The cost per balloon = $0.125

Cost of the empty balloons to lift the model is therefore;

Cost of balloons ≈ $0.125/balloon × 85,462 balloons = $10,682.75

The cost of balloons to lift the model is about $10,682.75

Cost of the empty balloons to lift the real house is therefore;

Cost ≈ $0.125/balloon × 11,387,750 balloons ≈ $1,423,468.75

Learn more about unit rates here: https://brainly.com/question/30315722

#SPJ1

Composition within C6H12O6 compound is 40%, compared to 53.33% in MgSO4 compound.

A compound is anything created when two or more separate chemical reactions are mixed together in a specific proportion. Chemical connections that are challenging to break are created when the constituents interact with one another. These bonds occur as a byproduct of atoms sharing or trading electrons.

In MgSO4,

MgSO₄ = 120 g/mole.

Mass of Mg = 24 g.

Mass of S = 32 g.

Mass of O = 16.

Mass of O₄ = 16 × 4

= 64 g.

= 24/120 × 100 %

% comp. = 20 %

= 32/120 × 100%

= 0.266 × 100%

% comp. of S = 26.66 %

comp. of O₄ = Mass of O₄/Mass of MgSO₄ × 100 %

= 64/120 × 100 %

= 0.533 × 100 %

∴ % comp. of O₄ = 53.33 %

In C6H12O6,

Molar mass of compound = 6(12.0)+12(1.01)+6(16.0)

=180g/mol

Mass due to carbon =6(12.0)

=72.06g/mol

% composition of C =72/180×100

=40%

To know more about compound visit:

https://brainly.com/question/20701639

#SPJ4

Scientific models are used to easily understand and interpret complex processes and natural phenomenon. For example, there are models for explaining water cycles, volcanic eruptions etc.

Scientific models are visual representations or simplified mathematical expressions used to interpret and understand complex process. There are theoretical models, dynamic models, still models as well advanced computer simulation models.

For example, the liquid drop model was used to explain the nuclear fission. Similarly, there are different atomic models to explain the structure of atoms. These are theoretical models.

There are advanced computer simulations nowadays to visualize many natural phenomenon's, like, volcanic eruptions, tectonic movements etc. Similarly still or working models of human organs etc. are examples of scientific models.

Find more on scientific models:

https://brainly.com/question/14250312

#SPJ1

Five covalent bonds are possible with phosphorus, as in PCl₅.

Two chlorides are produced by phosphorus: PCl₃ and PCl₅. Depending on the amount of chlorine present, both products are created when phosphorus burns in chlorine. The diagram of PCl₃ and PCl₅ is attached

Not a noble gas structure, as the phosphorus now possesses 5 pairs of electrons in the outer level. Phosphorus is a chemical element with the symbol P and atomic number 15.

Phosphorus is a mineral that naturally occurs in many foods and is also available as a supplement.

To look more about Phosphorus click here

brainly.com/question/4622631

#SPJ4

Out of the options listed, "Water vapor, carbon dioxide, and other volatile organic compounds (VOCs)" would not be considered a material stream exiting the roaster.

A material stream is a flow of a physical substance, such as a solid, liquid, or gas, that enters and exits a system or process. In the context of a chemical or process plant, a material stream is a stream of raw materials, intermediate products, or final products that are being produced, transported, or processed.

To perform a mass balance on a coffee roaster, you would consider all the material streams that enter and exit the system. These are gaseous emissions resulting from the roasting process and are not a physical material. The other options, "Spent coffee grounds," "Chaff," and "Roasted coffee beans" are physical materials that can be weighed and measured, and would be considered as material streams exiting the roaster.

Learn more about Water vapor:

brainly.com/question/22349941

#SPJ4

The density of the unknown material is approximately 1.74 g/cc

To find the density of the unknown material, we need to first calculate its volume. We can do this by finding the volume of the water that was displaced by the lump. The volume of the displaced water is given by the difference in volume of water in the cylinder before and after adding the lump.

The volume of the displaced water is equal to the final volume of water in the cylinder minus the initial volume of water in the cylinder:

V = 29.73 ml - 20.00 ml

=> 9.73 ml

Next, we'll convert the volume from milliliters to cubic centimeters (cc) since the density of the unknown material is usually expressed in g/cc:

V = 9.73 ml x (1 cc/1 ml)

=> 9.73 cc

Finally, we can calculate the density of the unknown material by dividing its mass by its volume:

density = mass / volume

density = 16.9245 g / 9.73 cc

density = 1.74 g/cc

So the density of the unknown material is approximately 1.74 g/cc.

To learn more about Density :

https://brainly.com/question/13195609

#SPJ4

Phosphorus (P) having atomic number 15 can only make a maximum of five bonds.

A mineral called phosphorus is found in many foods naturally and can also be taken as a supplement. It has a number of functions in the body. It is a crucial component of cell membranes, bones, and teeth. It maintains a normal range of blood pH and aids in the activation of enzymes.

Many meals naturally contain phosphorus, but dairy, poultry, shellfish, legumes, and nuts are the largest sources. These foods contain what is referred to as organic phosphorus. Animal foods absorb it more effectively than plant foods do.

To know more about phosphorous visit :

https://brainly.com/question/28399430

#SPJ4

Cyanide is the poisonous substance used to extract gold (d).

The extraction of metals and electroplating are two industrial procedures that commonly involve the highly poisonous chemical compound cyanide. Sodium cyanide, potassium cyanide, hydrogen cyanide gas, potassium ferrocyanide, and ferricyanide salts are some of the different forms it can take.

Cyanide is a poisonous compound that is frequently used to extract gold and has a negative impact on the environment. In order to remove gold particles from ore, the very poisonous chemical cyanide is employed in the gold mining process. Despite its effectiveness, cyanide leaking can have negative impacts on the ecosystem and neighboring plants and animals. Animal and fish deaths as well as contaminated water sources have been connected to cyanide releases from mining operations.

In addition, chronic exposure to low concentrations of cyanide can harm human health and result in headaches, vertigo, and nausea. Despite the fact that many nations have laws governing the use of cyanide in gold mining, its widespread usage and a lack of effective management and containment techniques continue to raise concerns.

To know more about cyanide, visit:

https://brainly.com/question/13030946

#SPJ4

the HBr solution has a concentration of 0.375 M.

Lye, commonly known as potassium hydroxide, is an inorganic substance having the composition KOH.

KOH is a reliable base. It often has a pH between 10 and 13.

The unidentified HBr solution has a concentration of 0.375 M.

Where M1 = Molar mass of HBr = and M2 = V1 x2 x2

V1 = Molar mass for KOH = 0.5 M2 = Volumes of Hyder = 200 ml x1 = n-factor for HBr = 1

V2 = Amount pf KOH Equals 150 ml x 2 = KOH's n-factor = 1

The numbers are now M1 200 1 = 0.5 150 1 M1 = 0.5 150 1 / 200 1 M1 =0.375 M.

Therefore, the HBr solution has a concentration of 0.375 M.

To know more about KOH solution visit:

https://brainly.com/question/29981801

#SPJ4

Solution: Water is liquid at room temperature because the molecules of water are bound by H bonding so the water molecules are not able to move freely and behave as a liquid.

Solid, liquid and gases differ in their densities, their arrangement of atoms/ molecules and their bonding or force of attraction between the atoms/ molecules. Water is liquid because molecules of water have medium intermolecular space between them and weak force of attraction which allow the molecules of water to move within the limit so it can only flow. Another reason for the liquid nature of water is presence of H bonding which hold the water molecules and don’t let them move freely. The energy needed to break the H bond is moderate and not available at room temperature. Hence water is liquid at room temperature.

Learn more about solid, liquid and gas here:

https://brainly.com/question/9402776

#SPJ4

Democritus and Aristotle, Greek philosophers who proposed early theories on the matter's nature and the changes it experiences, are credited with making the first attempt at explaining chemical processes.

A chemical change, often known as a chemical reaction, is the activity whereby an one or more materials are converted chemically into another. A drug combining with another substance may be necessary in this situation. It might also entail a substance disintegrating into other substances.

Because ash is created throughout the burning process as an unique chemical substance, scorching paper results in a chemical change. Carbon reacts with nitrogen and oxygen during combustion to produce carbon dioxide (CO2) and water. substance.

To know more about the chemical change visit: https://brainly.com/question/29760166

#SPJ4

Answer: 6 mol Fe

Explanation: For every 2 mol of Fe2O3, 4 mol of Fe react. That means for every mol of Fe2O3, 2 mol of Fe react. 3 mol Fe2O3 require 6 mol Fe.

Compound B should raise more safety concerns than compound A because the vapour pressure of the bottle of the liquid with a low boiling point will be higher than that of the liquid with a high boiling point.

The average energy of the particles present increases as the temperature rises. That implies that a greater number of them are probably energetic enough to break off from the liquid's surface. The vapour pressure will likely rise as a result.

Types of Molecules: A solid's or liquid's vapour pressure is determined by the kinds of molecules that make up the substance. The vapour pressure will be relatively low if the intermolecular interactions between molecules are quite strong. The vapour pressure will be high since the substance is relatively weak.

to know more about the safety concern of boiling points here:

brainly.com/question/10954066

#SPJ4

It is therefore an ionic compound, if NaCl is made up Na and Cl ions.

NaCl is an ionic solid. It dissociates into [tex]Na^{+}[/tex] and [tex]Cl^{-}[/tex] ions when it dissolves in water. By creating ion-dipole interactions, water molecules solvate these ions. The chemical equation for the dissociation of sodium chloride into [tex]Na^{+}[/tex] ions and [tex]Cl^{-}[/tex] ions when salt is dissolved in water is:

NaCl (s) → [tex]Na^{+} (aq) + Cl^{-} (aq)[/tex]

As a result, adding salt to water causes a chemical change. The products differ from the reactant (sodium chloride, or NaCl), which (sodium cation and chlorine anion). Therefore, a chemical change would occur in any ionic molecule that is soluble in water.

To know more about ionic compounds, refer:

https://brainly.com/question/26126708

#SPJ4

The balanced chemical equation for the complete combustion of methane is: CH4 + 2O2 -> CO2 + 2H2O. the mass of potassium chlorate  needed to burn 131.8 g of methane is 999.47 g.

The number of moles of methane can be calculated as follows:

131.8 g methane / 16.04 g/mol = 8.22 moles

From the balanced chemical equation, we can see that 2 moles of oxygen are required to burn 1 mole of methane, so the number of moles of oxygen needed to burn 8.22 moles of methane is 2 * 8.22 moles = 16.44 moles.

The balanced chemical equation for the decomposition of potassium chlorate to produce oxygen is: 2KClO3 -> 2KCl + 3O2

So, for every 2 moles of potassium chlorate decomposed, 3 moles of oxygen are produced. Hence, to produce 16.44 moles of oxygen, we need 16.44 moles / 3 moles/2 moles of KClO3 = 8.22 moles of KClO3.

The mass of potassium chlorate required can be calculated as follows:

8.22 moles * 122.55 g/mol = 999.47 g

So, the mass of potassium chlorate required to supply the proper amount of oxygen needed to burn 131.8 g of methane is 999.47 g.

Learn more about methane here:

https://brainly.com/question/2127750

#SPJ4

Solution: The bond between a hydrogen and nitrogen atom is weak bond as compared to the bond between hydrogen and oxygen atom is because of more electronegative nature of oxygen.

Bond strength depends upon the atomic size, electronegativity and bond length. The size of Oxygen atom is larger as compared to Nitrogen because of the stable electronic configuration of nitrogen. The electronegativity of oxygen is higher as compared to Nitrogen due to which the bond between Hydrogen and Oxygen is more polar than bond between Hydrogen and Nitrogen. Higher the bond polarity stronger the bond. This is the reason why the bond between Hydrogen and Nitrogen is weak bond as compared to the bond between Hydrogen and Oxygen.

learn more about weak bond and strong bond here

https://brainly.com/question/14104361

#SPJ4

Group A will have their rate of breathing measured in 350 F and Group B will have their rate of breathing measured in 700 F.Jennifer performed an experiment that if the temperature increases then the rate of breathing will also decrease.

Your breathing rate is another name for your respiratory rate. This is how many breaths you take per minute. You can calculate your breathing rate by counting the number of breaths you take in one minute while at rest.

This is because the increase in body temperature will increase the heart rate making it harder to breathe.

Thus, the temperature increases then the rate of breathing will also decrease.

To learn more about the breathing rate, follow the link;

https://brainly.com/question/28835350

#SPJ1

We may infer that the new number of moles was tripled, therefore our assumption is sound. 30 L is the same as the new volume.

To determine the factor, the final volume will be divided by the initial volume. As a result, when the amount of gas triples in moles, the volume also triples. The volume will quadruple when the amount of gas is increased by three times. According to Boyle's law, a gas's volume and pressure are inversely related. We therefore anticipate a 13-fold drop in volume at constant temperature if the pressure increases by a factor of 3 (tripled).

Learn more about moles from here:

https://brainly.com/question/26416088

#SPJ4

The ratio of the conjugate base to the weak acid is 10:1 at a pH of 5.0.The pH of a solution is defined as the negative logarithm of the hydrogen ion (H+) concentration, so pH = -log[H+].

In a weak acid solution, the hydrogen ion concentration is proportional to the degree of dissociation of the weak acid, which can be expressed as follows:

HA + H2O -> H3O+ + A-

where HA is the weak acid, A- is the conjugate base, H3O+ is the hydronium ion, and the arrow indicates the direction of the equilibrium.

The degree of dissociation of a weak acid can be expressed in terms of the acid dissociation constant (Ka), which is given by:

Ka = [H3O+][A-] / [HA]

At the equivalence point of a weak acid, the pH is equal to the pKa of the acid, which is defined as the negative logarithm of the Ka value. In this case, the pKa of the acid is 6.0, so at a pH of 5.0, which is less than the pKa, the weak acid is only partially dissociated.

To calculate the ratio of the conjugate base to the weak acid, we can use the following expression:

[A-] / [HA] = [H3O+] / Ka

Since the pH = -log[H+], we can substitute [H+] for [H3O+] in the above expression.

At a pH of 5.0, [H+] = 10^-5, so:

[A-] / [HA] = 10^-5 / Ka

The value of Ka can be calculated using the pKa:

Ka = 10^(-pKa) = 10^(-6.0) = 1.0 x 10^-6

So, the ratio of conjugate base to acid at a pH of 5.0 is:

[A-] / [HA] = 10^-5 / 1.0 x 10^-6 = 10

So, the ratio of the conjugate base to the weak acid is 10:1 at a pH of 5.0.

Learn more about conjugate base here:

https://brainly.com/question/30225100

#SPJ4

20 one-dollar dollars were randomly distributed among 20 people, or 20 one-dollar bills were randomly divided among 10 entropy .

Compared to solids or liquids, gases possess higher entropies because of their chaotic mobility.This implies that entropy will alter during a process in which the quantity of gas molecules present changes.

Entropy increases as a substance transitions from a solid to a liquid to a gas, and by observing the phases of a reactants and products, you can determine if an entropy change was positive or negative.Entropy rises whenever the number of gas moles rises.

To know more about entropy visit:

https://brainly.com/question/13146879

#SPJ4

Part-A

In the liquid form of NH[tex]_{3}[/tex], hydrogen bonding is the main force.

The main forces in the dispersion forces of CBr4

Dipole-dipole forces are the most common types of forces in CH[tex]_{3}[/tex]CL.

Part B:

The compounds' boiling points are listed in decreasing order.

NaF > CH[tex]_{2}[/tex]O > C[tex]_{2}[/tex]H[tex]_{2}[/tex] gas (less boiling point)

These are ionic chemicals :. (more boiling point)

A chemical compound is any material that consists of identical molecules having atoms from two or more different chemical elements.

Atoms from more than 100 different chemical elements, both in their pure forms and when mixed to form chemical compounds, make up all matter in the universe.

Only the atoms that are unique to that element are present in a pure element sample, and each element has its own unique atoms. For instance, the atoms that make up carbon differ from those that make up iron, which differ from those that make up gold. Every element has a distinctive symbol that is made up of one, two, or three letters that either come from the element's present name or from its original (typically Latin) name.

Learn more about Carbon here:

https://brainly.com/question/13719781

#SPJ4

Q) Part A:

What is the predominant intermolecular force in the liquid state of each of these compounds: ammonia (NH3 ), carbon tetrabromide (CBr4 ), and methyl chloride (CH3Cl )?? [options: dipole-dipole forces, hydrogen bonding, or dispersion forces]

Part B:

Rank the following compounds in order of decreasing boiling point: sodium fluoride (NaF ), acetylene (C2H2 ), and formaldehyde (CH2O )