A 500 mL bottle of soda is packaged at double atmospheric pressure. If the Henry’s Law constant for CO2 in water is 3.4 x 10-2 mol/(L atm), at 25 °C,2.905 grams of CO2 are dissolved in the soda before it is opened.
What is the Henry's law ?The weight of a gas dissolved by a liquid is proportional to the pressure of the gas on the liquid, according to Henry's law. The law, first proposed by the English physician and chemist William Henry in 1803, applies only to dilute solutions and low gas pressures.
Given:
Henry's law constant KH = 3.4 × 10^-2 mol/L atm
We need to find mass of carbon dioxide gas inside the soda bottle.
Step 1: Molar mass of CO2
= Sum of atomic masses of all elements present
= 12.01 g/mol C + 2 × 16 g/mol
= 44.01 g/mol
In Step 2 : Solubility of gas
According to Henry's law,
Solubility of gas = KH × P
Substitute the given values
S = 3.3 × 10 ^-2 mol /lit atm * 4 atm
S = 0.132 mol/lit
In Step 3 : liters of soda drink
Given that 500 ml of soda bottle.
Converting ml into liters.
As 1 lit = 1000 ml
= 500 ml × (1lit/1000 ml)
= 0.5 lit
Step 4: moles of carbon dioxide in soda drink
As solubility = number of moles of carbon dioxide / volume of soda drink in litre
So, number of moles of carbon dioxide = solubility × volume of soda drink in litre
= 0.132 mol/lit × 0.5 lit
= 0.066 mol carbon dioxide.
Step 5 : Mass of carbon dioxide in the soda water
As molar mass = mass / no. of moles
The mass = molar mass of carbon dioxide * no. of moles of carbon dioxide
mass = 44.01 g/mol × 0.066 mol
= 2.9045 g
Thus, 2.905 grams of CO2 are dissolved in the soda before it is opened.
To learn more about the Henry's law, follow the link;
https://brainly.com/question/16222358
#SPJ1
a piece of copper has a volume 250 l. how many atoms does the sample contain? in the boxes above, enter the correct setup that would be used to solve this problem.
The amount of copper atoms in the sample is 6.25 x 1024.
What are the copper's mass and volume?Copper has a density of 8.96 g/cm3. Copper is added in an amount of 8.13 cm3, or 8.13 mL. The volume is calculated by multiplying the length, breadth, and height. The fact that each of these dimensions measures exactly the same is good news for cubes. As a result, you can multiply any side's length by three.
The conversions that will be used are:
63.5 grams of copper per mole of copper
6.02 x 1023 copper atoms in a mole of copper
Multiplying the given mass by these conversions,
250 l * (1 mol Cu / 63.5 l Cu) * (6.02 x 10²³ Cu atoms / 1 mole Cu)
The sample contains 6.25 x 10²⁴ atoms of copper
To know more about copper atoms visit:-
https://brainly.com/question/5031537
#SPJ4
compound a compound b compound c which of the compounds above are strong enough acids to react almost completely with a hydroxide ion (pka of h2o
Diethyl malonate, pentane-2,4-dione, and phenol are potent enough to totally react with a hydroxide ion.
Phenol, a type of aromatic alcohol, can react with a hydroxide ion to form a phenolate ion. This reaction occurs through a deprotonation reaction, in which the hydroxide ion removes a proton from the phenol molecule. The reaction can be considered complete as long as a sufficient amount of hydroxide ion is present.
Pentane-2,4-dione, also known as oxopentanedione, is a type of organic compound with two ketone functional groups. It is unlikely that it will react completely with a hydroxide ion, as the ketone functional groups are not basic and therefore, do not readily react with hydroxide ions.
Diethyl malonate, on the other hand, is a type of ester that can react with a hydroxide ion to form a malonate ester. This reaction occurs through a deprotonation reaction, similar to the reaction between phenol and a hydroxide ion. However, like pentane-2,4-dione, the reaction is unlikely to be complete unless a sufficient amount of hydroxide ion is present.
Learn more about Phenol:
brainly.com/question/10361409
#SPJ4
Perform the following conversions: (Show work on back of page for this problem only). 98.6 oF = __________ oC = __________ K _________ oF = 25.0 oC = __________ K _________ oF = __________ oC = 405 K
The conversion of the given units are as follows:
98.6oF = 37°C = 310 K = 98.33°F
25.0°C = 298K = 76.73°F
131.85°C = 405 K
What is temperature ?
Temperature is a physical quantity that quantifies our feelings of hotness and coldness. A thermometer is used to measure temperature.
According to the International System of Units, the SI unit of temperature is Kelvin, which is represented by the symbol K. In the fields of science and engineering, the Kelvin scale is widely accepted or used.
However, in most parts of the world, temperature is measured using the Celsius or Fahrenheit scale.
Thus, The conversion of the given units are 98.6oF = 37°C = 310 K = 98.33°F.
To learn more about the temperature, follow the link;
https://brainly.com/question/11464844
#SPJ1
civil refer to individual rights, such as the freedom of speech and religion, while civil refer to equality under the law for different groups such as racial or religious minorities.
Civil refer to equality under the law for different groups such as racial or religious minorities or individual rights, such as the freedom of speech and religion and is a true statement.
What is Civil?This is referred to as a type of law that pertains to persons, things, and relationships that develop among them.
Such include the right of an individual to be able to do things freely such as religion, association without any form of discrimination thereby making it the correct choice.
Read more about Civil here https://brainly.com/question/24992590
#SPJ1
The full question:
civil refer to individual rights, such as the freedom of speech and religion, while civil refer to equality under the law for different groups such as racial or religious minorities. true/ false
NEED to turn in TONIGHT!
For the reaction: Ti(s)+2F2(g)→TiF4(s)
compute the theoretical yield of the product (in grams) for each of the following initial amounts of reactants.
b. 2.5 g Ti, 1.5 g F2
c. 0.239 g Ti, 0.287 g F2
The theoretical yield of the product (in grams) for each of the following initial amounts of reactants is 2.45 grams and 0.47 grams.
According to Stoichiometry
n = m ÷ M
n = number of moles m = mass (grams)M = molecular mass (g/mol)Atomic massa. Ti (s) + 2 F₂ (g) → TiF₄ (s)
m Ti = 2.5 gb. Ti (s) + 2 F₂ (g) → TiF₄ (s)
m Ti = 0.239 gLearn more about theoretical yield here: https://brainly.com/question/25996347
#SPJ1
which of the following cation names is incorrect?group of answer choicescopper (ii) ioncopper (i) iongold (iii) ionpotassium (i) ion
Copper is not a valid name for a cation in the options of the question. Hence option (I) copper is the correct option..
Describe copper.The chemical element copper (Cu) is a reddish, incredibly ductile metal belonging to Periodic Group 11 (Ib) that has an exceptional ability to conduct heat and electricity. Copper occurs naturally in its pure metallic state.
You require the mineral copper to maintain good health.Copper is used by the body for a variety of vital processes, including the synthesis of connective tissues, blood vessels, and energy. Additionally, copper stimulates genes and supports the immunological and nervous systems. For the growth of the brain, the body also needs copper.
To know more about copper visit :
https://brainly.com/question/1990913
#SPJ4
What element forms an ion with a +2 charge that has an electronic configuration of 122226323642310465241056 (or [Xe])?
which of the following substances will display an incomplete octet in its lewis structure? question 6 options: no co2 cl2 so2 icl
The Lewis structure of no material will ever include an incomplete octet.
How do I determine an incomplete octet?
Some atoms of certain elements are capable of forming stable bonds with less than eight valence electrons. When this happens, it is believed that the atom of the element included in the molecule still has a portion of its octet.
These elements often include hydrogen, boron, aluminium, beryllium, and all of which are stable with just two valence electrons (stable with only 6 valence electrons). This is similar to the octet rule for all subsequent periods below period 1, with the exception of hydrogen, where a noble gas structure should be given two valence electrons instead (like He).
Covalent compounds in groups 2 and 3 can generate the valence electrons in stable compounds without a noble gas structure.
For such more question on Lewis structure
https://brainly.com/question/20300458
#SPJ4
Which of the following oral irrigation solutions used in a home irrigating device has been proven to produce superior results than water alone?
Select one:
A. Chlorhexidine
B. Listerine
C. Hydrogen peroxide
D. None of these
Home oral irrigation can be a good substitute for flossing every day. Both claims are accurate. Therefore, all the options are incorrect.
What is an irrigation?
Irrigation, often known as watering, is the process of providing precise amounts of water to a specific area of land to aid in the growth of lawns, landscaping plants, and agricultural crops. For more than 5,000 years, irrigation has been a crucial component of agriculture and has been created by several cultures all over the world. In arid locations and during periods of below-average rainfall, irrigation aids in the growth of crops, the upkeep of landscapes, and the revegetation of damaged soils. Aside from these purposes, irrigation is also used to avoid soil compaction, inhibit weed growth in grain fields, and protect crops from frost.
To learn more about irrigation visit;
https://brainly.com/question/1398884
#SPJ4
The half-life of cobalt-60 is 5.3 years. What percent of a cobalt-60 sample remains after 10.6 years?
The cobalt with a half life of 5.3 years have the decay constant of 0.13 yrs⁻¹ . After 10.46 years 25.7 % of cobalt -60 will be there.
What is half life ?Heavy unstable radioactive isotopes undergo nuclear decay by the emission of charged particles. Nuclear decay is a first order reaction.
Thus, the decay constant k = 1/t ln W0/Wt
where t is the time of decay, W0 be the initial amount and Wt be the amount after time t.
The half life of the element = 5.3 years
k = 0.693/5.3yrs = 0.13 yrs⁻¹.
The time of decay is given 10.6 years.
Then,
t = 1/k ln Wo/(Wt )
10.6 = ln(100/wt)/ 0.13 yrs⁻¹
(100/wt) = ln (10.6×0.13)
Wt = 25.7 %.
Therefore, 25.7 % cobalt -60 sample will remain after 10.6 years.
Find more on nuclear decay:
brainly.com/question/21114779
#SPJ1
The radioactive isotope carbon-14 is used as a tracer in medical and biological research. Compute the half-life of carbon-14 given that the
decay constant k is -1.2097 x 10-4 (The units for k here are such that your half-life answer will be in years.)
Half-life can be calculated using the formula [tex]t(\frac{1}{2}) = \frac{ln(2)}{k}[/tex], where k is the decay constant. Therefore, the half-life of carbon-14 is 5730 years.
The half-life of a radioactive isotope is defined as the amount of time it takes for half of the original amount of the isotope to decay. The half-life can be calculated using the decay constant, which represents the rate at which the isotope decays. In this case, the decay constant of carbon-14 is given as -1.2097 x 10-4 (per year). To find the half-life, we need to solve the equation
[tex]t(\frac{1}{2}) = \frac{ln(2)}{k}[/tex],
Where [tex]t(\frac{1}{2})[/tex] is the half-life and k is the decay constant. Plugging in the value of the decay constant, we get:
[tex]t(\frac{1}{2}) = \frac{ln(2)}{-1.2097 * 10^{-4} }[/tex] = 5715 years
So, the half-life of carbon-14 is approximately 5715 years.
Learn more about isotopes
brainly.com/question/11680817
#SPJ4
rank the following types of intermolecular forces in general order of decreasing strength (strongest to weakest). rank from strongest to weakest. to rank items as equivalent, overlap them.
intermolecular forces are Ionic bond, Covalent bond, Hydrogen bond, Dipole-dipole interaction, Dispersion forces (Van der Waals forces).
Intermolecular forces are the forces that exist between molecules and determine many of their physical properties. These forces can be categorized into five main types: ionic bonds, covalent bonds, hydrogen bonds, dipole-dipole interactions, and dispersion forces (Van der Waals forces). Ionic bonds occur between ions with opposite charges and are the strongest intermolecular forces. Covalent bonds are formed by sharing electrons between atoms and are also strong. Hydrogen bonds are weaker than ionic and covalent bonds, but still play a significant role in molecular behavior. Dipole-dipole interactions occur between molecules with permanent electric dipoles. Finally, dispersion forces, also known as Van der Waals forces, are the weakest intermolecular forces and arise from the fluctuating electric fields generated by electrons. Understanding the relative strengths of these intermolecular forces is crucial for predicting and understanding the behavior of molecules.
Learn more about Intermolecular force here:
https://brainly.com/question/9007693
#SPJ4
If the initial concentration of SO2Cl2
is 1.00 mol L−1
, how long will it take for the concentration to decrease to 0.62 mol L−1
?
It is given that, the rate constant of the decomposition of SO₂Cl₂ is 1.45 ×10⁻⁴ s⁻¹. Then the rate of the reaction is 1.45 ×10⁻⁴ M s⁻¹ for the initial concentration of 1 mole. Therefore, it will take 0.72 hours to decrease to 0.62 mol/L.
What is reaction rate ?Rate of a reaction is the rate of decrease in the concentration of reactants or the rate of increase in the concentration of products. The expression for the rate law is:
rate = k [A] for a single reactant reaction.
Where k is the rate constant.
Given the rate constant = 1.45 ×10⁻⁴ s⁻¹
concentration of SO₂Cl₂ = 1 M.
then rate of reaction = 1.45 ×10⁻⁴ M s⁻¹
Hence, for one second 1.45 ×10⁻⁴ M of the reactant vanishes within each seconds. Hence, the disappeared concertation here is, 1 - 0.62 = 0.38 M.
The time taken to consume 0.38 M of the reactant is :
0.38 M × 1 s/ 1.45 ×10⁻⁴ M = 2620 seconds or 0.7 hours.
Therefore, it will take 07 hours to decrease the concentration to 0.62 moles.
Find more on reaction rate :
https://brainly.com/question/497987
#SPJ1
Your question is incomplete. But the complete question probably was:
The decomposition of SO2Cl2 is first order in SO2Cl2 and has a rate constant of 1.46×10−4 s−1 at a certain temperature. If the initial concentration of SO2Cl2 is 1.00 M, how long will it take for the concentration to decrease to 0.62 M?
Name an atom that loses one electron when it reacts with another atom
Answer:
Na Atom
Explanation:
state what happens to the average kinetic energy of the gas molecules if the cabin temperature descreases
The average kinetic energy of the gas molecules is decrease if the cabin temperature decreases.
The average kinetic energy of the gas molecules also falls with a drop in temperature. This indicates that in order for the pressure to remain constant, the volume must decrease in order to make up for the molecules' decreased average kinetic energy.
The average kinetic energy of the molecules in a body is measured by its temperature. The average kinetic energy of the molecules increases when a body's temperature rises. Similarly to this, lowering the temperature lowers the molecules' average kinetic energy.
To learn more about kinetic energy please visit
https://brainly.com/question/26472013
#SPJ4
What is the mass of 0.80 moles of Mg?
The mass of 0.80 moles of Mg are 19 gram.
What do you mean by the molar mass ?The term molar mass (M) is defined as the mass of a chemical compound divided by its total amount of substance measured in moles.
It is defined as MB = m/nB, where m is the total mass of a sample of pure substance and nB is the amount of substance B in moles.
Given:
0.80 moles of Mg = ?
Convert to "g" (units of "g" ; that is "grams" of "Mg" ).
The molar mass of "Mg" is 24.305 g / mol
0.80 mol × (24.305 g Mg / 1 mol Mg) = ? g Mg ??
we have,
(0.80 × 24.305) g of Mg
= 19.444 gram
Round this number to 2 (two) significant figures therefore, there are 2 (two) significant figure in our given amount of Mg " 0.80 mol" ;
= 19 gram
Thus, the mass of 0.80 moles of Mg are 19 gram.
To learn more about the molar mass, follow the link;
https://brainly.com/question/12127540
#SPJ1
Wood has a density of 6.84 g/cm3. What is the volume of 26.4 g of wood?
The volume of the wood is? blank
unit ? blank
D = mass/volume
6.84g/cm^3 = 26.4g/x
solve for x
x = 3.86 cm^3 notice 3 sig figs
a proton is released at point a on the top plate with zero velocity. find the velocity v(x) of the proton at distance x from the top plate (at point b).
The velocity of a proton released at point a on the top plate can be found using the concept of electrostatic potential.
The electric potential difference between two points is defined as the work done per unit charge in moving a small test charge from one point to the other. The velocity of a proton released with zero velocity can be found by calculating the electric potential difference between points a and b, and using the formula for kinetic energy:
K = qV,
where q is the charge of the proton, and V is the electric potential difference between points a and b. The velocity of the proton can then be found using the formula for kinetic energy:
v = √(2K/m),
where m is the mass of the proton.
It is important to note that in order to perform these calculations, information about the electric field and the potential difference between points a and b is needed. Without these details, it is not possible to find the velocity of the proton.
Learn more about velocity here:
https://brainly.com/question/26551488
#SPJ4
choose a balanced chemical reaction for nab(oh)4 forming a sodium ion and a tetrahydroxyborate anion.
Answer: Hope this helps:
The balanced chemical reaction for the formation of sodium ion (Na+) and tetrahydroxyborate anion (B(OH)4-) from sodium tetrahydroxyborate (NaB(OH)4) is:
NaB(OH)4 → Na+ + B(OH)4-
This reaction represents the dissociation of sodium tetrahydroxyborate in water to form the sodium ion and tetrahydroxyborate anion, which are both strong electrolytes and therefore completely dissociate in aqueous solution.
fill in the blank. a(n)___style sheet includes the style sheet within the opening and closing tags of the html document; this type is used when you want to create styles for a single webpage that are different from the rest of the website.
An inline style sheet includes the style sheet within the opening and closing tags of the HTML document; this type is used when you want to create styles for a single webpage that are different from the rest of the website.
Inline styling in HTML is the process of adding CSS styles directly to an HTML element. This allows you to specify the exact styling of an element without having to create a separate style sheet.
Inline styles are added directly to the HTML element using the style attribute. For example, if you wanted to make a paragraph red and bold, you would use the following code:
<p style="color: red; font-weight: bold;">This is a bold, red paragraph.</p>
Inline styles are generally used for small changes or for styling a single element. For larger changes, or for styling multiple elements, an external style sheet should be used.
Learn more about HTML
https://brainly.com/question/9069928
#SPJ4
In the combustion of hydrogen gas, hydrogen reacts with oxygen from the air to form water vapor.
hydrogen+oxygen⟶water
If you burn 28.8g of hydrogen and produce 258g of water, how much oxygen reacted?
Answer:
Below
Explanation:
If the used 28,8 g of hydrogen reacted completely....the rest of the 258 must be the oxygen
258 - 28.8 = 229.2 gm of Oxygen
According to the stoichiometry of the mentioned chemical equation, 230.4 g of oxygen reacts with 28.8 g hydrogen.
What is chemical equation?Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.
A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .
The first chemical equation was put forth by Jean Beguin in 1615.By making use of chemical equations the direction of reaction ,state of reactants and products can be stated. In the chemical equations even the temperature to be maintained and catalyst can be mentioned.
According to the stoichiometry, 4 g hydrogen react with 32 g oxygen thus 28.8 g hydrogen requires 28.8×32/4=230.4 g oxygen.
Learn more about chemical equation,here:
https://brainly.com/question/28294176
#SPJ2
Determining Overall Reaction Rate Laws from Experimental Data. Butadiene, C4H6, dimerizes in a Diels-Alder condensation reaction to yield a substituted cyclohexene, C8H12. Given the data on the 500 K gas phase reaction below, answer the following questions.
Time (s)
Total Pressure (torr)
C4H6 Partial Pressure (torr)
0
1250
1250
750
1160
1070
1500
1090
930
2460
1020
790
3425
950
650
4280
920
590
5140
900
550
6000
880
510
7500
850
450
9000
820
390
10500
810
370
a. Write the balanced chemical reaction and the overall differential rate law assuming the overall reaction rate is only a function of C4H6 concentration (CC4H6), reaction rate constant (k), and reaction rate order (a).
b. Using relative rates of reaction, what is the differential rate law for C4H6?
c. Plot the linearized form of CC4H6 as a function of time, assuming the following reaction rate orders. Each order should be a separate graph and include the linear trendline equation and R2 value.
i. Zero order
ii. First order
iii. Second order
d. From the graphs in part (c), what is the experimental rate order of this reaction?
e. What is the experimental reaction rate constant, k, including units?
a) d[C₈H₁₂]/dt = k * [C₄H₆]ᵃ, b) d[C₄H₆]/dt = -k * [C₄H₆]ᵃ . c) i. Zero order: ln([C₄H₆]0/[C₄H₆]) = -kt, [C₄H₆] = [C₄H₆]0 * e⁽⁻kt⁾, ii. First order:, ln([C₄H₆]/[C₄H₆]0) = -kt, [C₄H₆] = [C₄H₆]0 * e⁽⁻kt⁾, iii. Second order:, 1/[C₄H₆]=kt + 1/[C₄H₆]0, [C₄H₆] = 1 / (kt + 1/[C₄H₆]0), d) From the graphs in part (c), the experimental rate order of this reaction is first order. e) The experimental reaction rate constant, k, can be determined from the slope of the first order plot and has units of 1/s.
The balanced chemical reaction for the Diels-Alder condensation of butadiene (C₄H₆) to yield a substituted cyclohexene (C₈H₁₂) is C₄H₆+ C₄H₆-> C₈H₁₂. The overall differential rate law is d[C₈H₁₂]/dt = k * [C₄H₆]ᵃ, where k is the reaction rate constant and a is the reaction rate order. The differential rate law for C₄H₆is d[C₄H₆]/dt = -k * [C₄H₆]ᵃ. The rate order is determined from the linearized form of the data, which shows that the reaction is first order with a reaction rate constant k having units of 1/s.
a. The balanced chemical reaction and the overall differential rate law assuming the overall reaction rate is only a function of C₄H₆ concentration (CC₄H₆), reaction rate constant (k), and reaction rate order (a) is given by:
C₄H₆ + C₄H₆ -> C₈H₁₂
d[C₈H₁₂]/dt = k * [C₄H₆]ᵃ
b. The differential rate law for C₄H₆ is given by:
d[C₄H₆]/dt = -k * [C₄H₆]ᵃ
c. The linearized form of CC₄H₆ as a function of time for each reaction order:
i. Zero order:
ln([C₄H₆]0/[C₄H₆]) = -kt
[C₄H₆] = [C₄H₆]0 * e⁽⁻kt⁾
ii. First order:
ln([C₄H₆]/[C₄H₆]0) = -kt
[C₄H₆] = [C₄H₆]0 * e⁽⁻kt⁾
iii. Second order:
1/[C₄H₆] = kt + 1/[C₄H₆]0
[C₄H₆] = 1 / (kt + 1/[C₄H₆]0)
d. From the graphs in part (c), the experimental rate order of this reaction is first order.
e. The experimental reaction rate constant, k, can be determined from the slope of the first order plot and has units of 1/s.
Learn more about rate law here: brainly.com/question/30379408
#SPJ4
To make 1.50 L of 0.100 M NaCl from a 2.92 M stock solution, you would need to take {blank} mL of the stock solution and add {blank} mL of water.
Consequently, add 1453 ml water to 47 ml.
In chemistry, what exactly is a water?Water is a material that exists in gaseous, solid, and solid phases and is made up of the chemical atoms and oxygen. It is among the common and essential compounds.At normal temperature, it is a flavorless, odorless liquid with the crucial property of dissolving several other compounds.
Whose full name is H2O?H 2 O is another name for water. Water is most frequently used for drinking purposes. M2 m of hydrogen or one mole of oxygen make up dihydrogen monoxide, which is what it is. The object is liquid and is at room temperature.
3.13 * x = 1.5 * 0.1
x = 0.047L
So take 47 ml and add 1453 ml of water
To know more about water visit:
https://brainly.com/question/28465561
#SPJ1
ions or molecules are carried from one side of the plasma membrane to the other by integral proteins called
Integral proteins, also known as transporters, play a crucial role in transporting ions and molecules across the plasma membrane.
The plasma membrane is a lipid bilayer that acts as a barrier between the interior and exterior of a cell, controlling the movement of ions and molecules into and out of the cell.
Integral proteins are embedded in the lipid bilayer and have channels or binding sites that allow them to interact with ions or molecules on either side of the membrane. Some transporters are passive, allowing ions and molecules to diffuse down their concentration gradient. Others are active and require energy to pump ions or molecules against their concentration gradient.
Examples of transporters include:
Sodium-Potassium pump (Na+/K+ ATPase), which actively transports sodium ions out of the cell and potassium ions into the cell.
Glucose transporters (GLUTs), which are involved in the transport of glucose into cells.
Chloride channels, which allow chloride ions to diffuse passively across the membrane.
Overall, transporters play a crucial role in maintaining the ion and molecule balance within cells, and help to regulate a wide range of cellular processes, including cell volume, metabolic processes, and signal transduction.
To learn more about plasma membrane please click on below link
https://brainly.com/question/14015347
#SPJ4
You notice that the majority of the electrons in NaCl spend their time around the chlorine. You also notice that the electrons in H2 are evenly distributed among two atoms. Which two types of bonds are represented in these molecules?
a. covalent bonds in NaCl; ionic bonds in H2
b. ionic bonds in NaCl; ionic bonds in H2
c. covalent bonds NaCl; covalent bonds in H2
e. ionic bonds in NaCl; covalent bonds in H2
The types of bonds that are represented by those molecules are ionic bond (in NaCl) and covalent bonds (in H₂).
In general, there are three ways that molecules can form atomic bonds:
Ionic bondAn ionic bond involves the electrostatic attraction between oppositely charged ions/two atoms with different electronegativities. An example is the bond between Na⁺ and Cl⁻ to form NaCl.
Covalent bondA covalent bond is where two or more atoms share their valence electrons. An example is the bond between two hydrogen (H) atoms to form H₂.
Metallic bondA metallic bond is where the bonding electrons are delocalized over a lattice of atoms.
Attached below is an image of a covalent bond that is forming the compound H₂. In it, two hydrogens (H) atoms share each of their electrons.
Learn more about covalent bond at brainly.com/question/3447218
#SPJ4
A typical lead-acid storage battery contains sulfuric acid, H2SO4, which breaks down into 2H + SO4 and each molecule delivers two electrons to the external circuit. If the battery delivers a total charge of 2.0 x 105 C, how many grams of sulfuric acid are used up?
One mole of electrons is equal to Avogadro's number of electrons, which is 6.02 x 10^23 electrons. So, the number of moles of electrons delivered by the battery can be calculated as follows:
n = (2.0 x 10^5 C) / (1 electron/6.02 x 10^23 electrons)Next, we know that each mole of sulfuric acid delivers 2 moles of electrons, so the number of moles of sulfuric acid used up is n/2.
About MoleMole comes from the word moles which means a certain amount of mass or in other water a small amount of mass. In chemistry, the mole is the unit for the amount of a substance. In the field of physics, mole has a standard definition as the amount of mass of a substance that contains as many particles as atoms contained in 12 grams of C-12.
Learn More about mole at brainly.com/question/15356425
#SPJ4
Which of the following statements is true for ideal gases, but is not always true for real gases? Choose all that apply.
(a) Collisions between molecules are elastic
(b) Molecules are in constant random motion
(c) Replacing one gas with another under the same conditions, has no effect on pressure
(d) There are no attractive forces between molecules.
For ideal gases, statements (b) and (c) are accurate, but not usually for actual gases. Pressure is unaffected by switching from one gas to another under the same circumstances.
What distinguishes an ideal gas from a real gas in particular?A theoretical gas called an ideal gas is one that has many of randomly moving particles but doesn't have any interparticle interactions. The converse is true of a real gas; its molecules interact, and it takes up space. PV hence always equals nRT as a result of this.
Why is the theory of ideal gas invalid under high pressure and low temperature?The ideal gas law breaks down at low temperatures and high pressures because the gas's volume is so small, causing the molecules' intermolecular distance to shorten.
To learn more about ideal gas visit:
brainly.com/question/14934878
#SPJ4
when equilibrium is reached, how many molecules of h2o, co, h2, and co2 are present? do this problem by trial and error - that is, if two molecules of co react, is this equilibrium; if three molecules of co react, is this equilibrium; and so on.
The reaction equation for the balance of gases at equilibrium is given by the law of mass action just only like this:
CO(g) + H2O(g) ⇌ CO2(g) + H2(g)
And need specific conditions to make molecules to react and make equilibrium.
Determining Equilibrium ConcentrationsEquilibrium is a state where the rate of the forward reaction is equal to the rate of the reverse reaction. The number of molecules of each species at equilibrium depends on the reaction conditions such as temperature, pressure and the initial concentrations of reactants and products.
The reaction equation for the balance of gases at equilibrium is given by the law of mass action:
CO(g) + H2O(g) ⇌ CO2(g) + H2(g)
To determine the number of molecules at equilibrium, we need to use the equilibrium constant expression (Kc) for the reaction, which is defined as the ratio of the concentration of products raised to their stoichiometric coefficients, to the concentration of reactants raised to their stoichiometric coefficients.
Since the problem does not provide any specific conditions, it is not possible to determine the number of molecules of each species present at equilibrium through trial and error.
Learn more about Determining Equilibrium Concentrations here:
https://brainly.com/question/16203171
#SPJ4
5. From the two examples provided, would you expect the formula Sg to represent a compound to an element?
From the two examples provided, the chemical formula Sg represents an element.
What is an element?
It is defined as a substance which cannot be broken down further into any other substance. Each element is made up of its own type of atom. Due to this reason all elements are different from one another.
Elements can be classified as metals and non-metals. Metals are shiny and conduct electricity and are all solids at room temperature except mercury. Non-metals do not conduct electricity and are mostly gases at room temperature except carbon and sulfur.
Learn more about elements,here:
https://brainly.com/question/13516179
#SPJ1
if the reactant's configuration were (1r,2r), then the configuration of the substitution product(s) will be (select all that apply):
Therefore, if the configuration of the reactant was (1R, 2R, 4R), the configuration of a substituted product(s) will be no R/S.
What is the structure of the finished product?Product configuration is the method of choosing and organizing pieces of a product in a specific order to customize it to a customer's demands. A personalized product typically adds greater value than like a one-size-fits-all substitute since every customer had different objectives and limitations.
How does reactant explain work?A reactant is what? The components of a chemical reaction are referred to as reactants. Atoms, the fundamental units of matter, reorganize themselves to produce new combinations in a process known as a chemical reaction. Raw materials can react each other are known as reactants.
To know more about reactant configuration visit:
brainly.com/question/29727979
#SPJ4