3. The city of Oslo, Norway, has an average daytime temperature of -3.7°C in January. The city of Bergen, Norway, has an average daytime temperature of 1.5°C. Both cities are at about the same latitude. One city is on the Norwegian coast; the other is inland. A mountain is between them. Which city do you think is on the coast? Why? What effect do you think the mountain has on the temperature of the inland city

Nuclear reactors are the heart of a nuclear power plant. They contain and control nuclear chain reactions that produce heat through a physical process called fission. That heat is used to make steam that spins a turbine to create electricity.

The beat frequency is 10Hz and the beat period is 0.1s when two sound speakers one playing a note of frequency 100 Hz and one playing a note of frequency 90 Hz.

Given frequency of first note (f1) = 100Hz

Frequency of second note (f2) = 90Hz

The difference in frequency between two waves is known as the beat frequency. It is as a result of both positive and negative interference. While we understand the beat frequency to be the rate at which the volume of the sound changes, we understand the regular frequency of the waves to be the pitch of the sound.

Beat frequency = f1 - f2 = 100 - 90 = 10Hz

The beat period is the space of time between two successive maxima or minima. Additionally, it is equivalent to the beat frequency's reciprocal.

The beat period = 1/10 = 0.1s

To learn more about frequency click here https://brainly.com/question/22548127

#SPJ4

The strength of the force the chair exerts on me is equal in magnitude to the force I exerted on the chair, but opposite in direction. This is due to Newton's Third Law of Motion, which states that for every action, there is an equal and opposite reaction.

The preliminary force that you exert on the heavy chair is the force which you follow to it that allows you to get it to move. The energy of this force will rely on a number of factors, such as your personal bodily power, the load of the chair, and the surface you are pushing it on. In widespread, you may want to use a mild amount of pressure so one can get a heavy chair to transport, and this force will boom because the chair receives heavier. Additionally, if you are pushing the chair on a slippery floor, you may need to apply a more potent force in order to overcome the friction among the chair and the floor.

To know more about Newton's Third Law visit: https://brainly.com/question/29768600

#SPJ4

1/second Equals 1.99 x 10-7 radians. Earth rotates at a rate of 1.99 x 10-7 per second.

If the angles were not approximately 1 one of, then the radius times the angle's measurement in radians, or the width of a arc s = r, would be the ratio of the distance by the point located on the circle. The result of substituting into the linear speed formula is v = r t or v = r t.

A pseudovector used in physics to express how quickly the angular location or orientation of an item changes over time is called an angular velocity or rotational velocity.

To know more about earth rotates visit:

https://brainly.com/question/1073674

#SPJ4

Answer:

Explanation:

To find the resultant of two forces when given an angle, you can use the two-dimensional vector addition method. Here are the steps to follow:

Represent each force as a vector. The magnitude of each vector should be equal to the magnitude of the force, and the direction of each vector should be equal to the direction of the force.

Place the vectors on a coordinate plane with their tails at the origin and their tips pointing in the direction of the forces.

Find the x and y components of each vector using trigonometry. For example, if the angle between the x-axis and the vector is θ, then the x-component of the vector is equal to the magnitude of the vector times cos(θ) and the y-component of the vector is equal to the magnitude of the vector times sin(θ).

Add the x and y components of the two vectors to find the x and y components of the resultant vector.

Use the Pythagorean theorem to find the magnitude of the resultant vector. The magnitude of the resultant vector is equal to the square root of the sum of the squares of the x and y components.

Find the direction of the resultant vector by finding the inverse tangent (tan^-1) of the ratio of the y-component of the resultant vector to the x-component of the resultant vector.

The final result is the vector that starts at the origin and ends at the point determined by the x and y components of the resultant vector, with a magnitude equal to the magnitude of the resultant vector and a direction equal to the direction of the resultant vector.

By using this method, you can find the magnitude and direction of the resultant of two forces given an angle between them.

By (a) extending the object's travel distance, an inclined plane decreases the force required to move the object.

At this point, describing a force as a push or a pull is perfectly acceptable. There is no such thing as a force that an object "has in it" or "contains." A force is applied to one thing by another. The idea of a force encompasses both living and non-living things.  A force has the ability to alter or increase the velocity of a massed object. A simple way to express force is with a push or a pull.. The fact that a force has both a magnitude and a direction makes it a vector quantity.

Contact forces and remote action There are two distinct kind of forces. Your consistent use of force is obvious. Push and pull are basically forces. When you push or pull against an object, you apply force to it.

To know more about Force visit:

https://brainly.com/question/13191643

#SPJ4

The similarity between Positron Emission Tomography (PET) and Functional Magnetic Resonance Imaging (fRMI) is that both methods measure blood flow in the brain.

A positron emission tomography (PET) scan is what is used to determine how much blood is flowing through the brain. To accomplish this, a radioactive isotope is injected intramuscularly into a human or animal subject. Both a positron emission tomography (PET) scan and a functional magnetic resonance imaging (fMRI) scan monitor blood flow in the brain, which is an indirect measure of brain activity. However, there are benefits and drawbacks associated with the use of either approach for functional brain imaging.

PET scans have the advantage over fMRI in that the subject does not need to maintain the same level of stillness throughout the examination. The results from an fMRI scan can be completely ruined by even the tiniest of movements, whereas the data from a PET scan are unaffected by such movements.

To learn more about Positron Emission Tomography (PET), click here:

https://brainly.com/question/29315141

#SPJ4

Betelgeuse has an angular dimension of around 0.0000122 degrees.

The phrase "arc second" is used in astronomy in three ways: (1) to describe a given distance in declination on a star chart, (2) as a given unit of astronomical object size, and (3) as a statement of telescope resolving ability. Circle angles may be calculated in radians since 2 times the radius equals the circumference, with 2 of these making up one full revolution. Alternatively, 0.017453 radians per degree. Multiply 206,265 arcseconds per radian to convert radians to arcseconds.

Here,

To convert the angular diameter of Betelgeuse from arcseconds to degrees, we can use the conversion factor:

1 degree = 3600 arcseconds

So, the angular size of Betelgeuse in degrees can be found by dividing the angular diameter in arcseconds by the conversion factor:

Angular size (in degrees) = Angular diameter (in arcseconds) / (3600 arcseconds/degree)

Angular size (in degrees) = 0.044 arcseconds / 3600 arcseconds/degree

= 0.044 / 3600

= 0.0000122 degrees

So, the angular size of Betelgeuse is approximately 0.0000122 degrees.

To know more about arcseconds,

https://brainly.com/question/14979725

#SPJ4

No, the center of mass within the system will advance to the same pace in the alternative situation, contrary to the claim made.

The change in an object's position with respect to time is known as motion. Motion includes sounds like windows shaking, a book falling off a table, water running from faucet, etc. There is motion in all of the air we breathe! So globe in its entirety is in move.

An object's change in momentum is referred to as its impulse.

I = Time * Force

No, because the system consists of the same cubes in both cones and perhaps some change in the momentum of the blocks is noted, the center of mass motion following the collision is independent of the cube that was trapped initially. They provide the same impulse and induce the same ultimate velocity in both cones since they are the same.

To know more about Motion visit:

https://brainly.com/question/26083484

#SPJ4

The body's acceleration is equal to zero if the total external force exerted on it is zero.

When F, the net force, is zero, it can be demonstrated that Newton's First Law is a particular case of the Second Law. The acceleration must also be zero at that point. The velocity stays the same since acceleration is determined by dividing the change in velocity by the amount of time that has passed.

The object will move at a constant speed if there is no acceleration. We may examine Newton's second law and the acceleration formula mathematically. We are aware that there is no force. The acceleration must be zero because we are aware that the mass cannot be zero.

to know more about acceleration here:

brainly.com/question/12550364

#SPJ4

Radio waves are most likely to be non-ionizing radiation.

Electromagnetic radiation can be classified into ionizing or non-ionizing radiation, depending on its ability to ionize atoms or molecules in its path. Ionizing radiation has enough energy to remove electrons from atoms or molecules, while non-ionizing radiation lacks sufficient energy to do so.

Radio waves have the lowest frequency and energy among the different types of electromagnetic radiation in the electromagnetic spectrum. They have a wavelength range of 1 millimeter to 100 kilometers, and their energy is typically below 10^-4 electron volts, which is not enough to ionize atoms or molecules. As a result, radio waves are classified as non-ionizing radiation.

On the other hand, ultraviolet, X-rays, and gamma rays have higher frequencies and energies than radio waves and are classified as ionizing radiation. Ultraviolet radiation has enough energy to ionize atoms or molecules in the air, causing sunburn and other skin damage. X-rays and gamma rays have enough energy to penetrate through materials, including human tissues, and can cause cellular damage or mutations if exposure occurs.

In summary, radio waves are non-ionizing radiation, while ultraviolet, X-rays, and gamma rays are ionizing radiation.

For such more questions on radiation

https://brainly.com/question/27219025

#SPJ11

Atmospheric pressure is greater at beach than it is at the top of a mountain.

Atmospheric pressure is the force the air produces per unit of space. Height increases are accompanied by a drop in air pressure. Since the height of the air column is greater at sea level, the air exerts a greater pressure there.The pressure is lower at greater elevations because there are fewer air molecules above a given surface than there would be at a lower elevation.

As you ascend, the height of the air column above you and its density both drop, which causes the atmospheric pressure to drop.

The air pressure will therefore be higher at ground level than it is at the summit of a tall mountain.

For more question on pressure click onhttps://brainly.com/question/15215203

#SPJ4

The International Space Station orbits the Earth at an altitude of approximately 200 miles (320 km).

At this altitude, the Earth's gravity is weaker than it is on the surface, so astronauts aboard the ISS feel weightless because they are in freefall. The ISS is perpetually falling towards the Earth, but the Earth's curvature means that the station is always falling away from the surface, creating a feeling of weightlessness. Because there is no outside force pressing or tugging on an astronaut's body while they are on the International Space Station, they merely feel weightless. They are falling freely at this point. The absence of the normal force creates the illusion of weightlessness.

To learn more about gravity click here https://brainly.com/question/14874038

#SPJ4

Electrical energy which is provided to the pump is transformed into gravitational potential energy and into sound in equal portions. Thus, the correct option is C.

The principle of conservation of energy establishes that the energy cannot be created nor it can be lost alone. Energy can only be transformed, based on the principle of conservation of energy, the mechanical energy of the system is established as formed by the kinetic energy and the different in potential energies.

In this case, the electrical energy of the system is transformed into kinetic energy to raise the water temperature, when it reaches a height level where its actual speed is zero, all the mechanical energy is transformed into gravitational potential energy.

Therefore, the correct option is C.

Learn more about Electrical energy here:

https://brainly.com/question/16182853

#SPJ1

Your question is incomplete, most probably the complete question is:

Ahmad uses an electric pump to raise water to a reservoir on his farm. The pump is very noisy, and Ahmad’s uncle, who is an engineer, told him that only 50\%50%50, percent of the energy it consumes is delivered as gravitational potential energy to the water. When Ahmad turns off the pump, he notices that when he touches it, it has not warmed up.

What happened to the electrical energy provided to the pump?

a. It mostly transformed into gravitational potential energy, and a small portion transformed into sound.

b. It mostly transformed into sound, and a small portion transformed into gravitational potential energy.

c. It transformed into gravitational potential energy and into sound in equal portions.

d. It mostly transformed into sound energy and gravitational potential energy, and a small portion disappeared.

To achieve a peak speed of 40 mph, the new motors/propellers must provide a force equal to the mass of the drone multiplied by the acceleration necessary to achieve the target speed.

The term "force" has a specific meaning in science. At this level, it is quite acceptable to refer to a force as a push or a pull. A force is not something that an item possesses or possesses. Another item applies a force to another. The concept of a force is not restricted to living or non-living entities.

Here,

The force required to increase the speed of a drone can be calculated using the equation of motion, F = ma, where F is the force, m is the mass of the drone, and a is the acceleration.

To increase the speed of the drone from 20 mph to 40 mph, the acceleration required is:

a = (40 mph - 20 mph) / t

where t is the time taken to reach the new speed. This value can be estimated if the drone's mass and other factors affecting its performance are known.

The force required to produce this acceleration can be calculated as follows:

F = m * a

where m is the mass of the drone.

In order to attain a top speed of 40 mph, the new motors/propellers would need to generate a force equal to the mass of the drone multiplied by the acceleration required to reach the desired speed.

To know more about force,

https://brainly.com/question/29787329

#SPJ4

the volume of the sample of vegetable oil is  [tex]5.13 * 10^-5 m^3.[/tex]

The density and mass of a sample of vegetable oil can be used to determine its volume. To determine volume, use the following formula:

V = m / ρ

where V stands for volume, m for mass, and for density.

Given that the mass of the vegetable oil is 46.9 g and its density is 915 kg/m3, the volume may be calculated as follows:

The mass need first be converted from grams to kilograms:

0.0469 kg is equal to m = 46.9 g * 1 kg/1000 g.

Next, determine the volume using the following formula:

V = m / V = 0.04690 kg / 915 kg/m3 V = 0.04690 kg / 915 V = [tex]5.13 * 10^-5 m^3.[/tex]

Therefore, the sample of vegetable oil has a volume of [tex]5.13 * 10^-5 m^3.[/tex]

To know more about volume, click here,

brainly.com/question/463363

#SPJ4

As a result, the system's maximum spring potential energy U is given by: U = (2π^2MD^2)/P^2

Potential energy is the energy stored by an item as a result of its location relative to other objects, internal tensions, electric charge, or other reasons. Potential energy is stored energy that is affected by the relative location of various components in a system. When a spring is squeezed or extended, its potential energy increases. A steel ball has higher potential energy when lifted above ground than when it falls to Earth.

Here,

The maximum spring potential energy U can be calculated using the equation:

U = (1/2)kD^2

where k is the spring constant, which can be found from the period of oscillation using the equation:

k = (4π^2M)/P^2

Substituting the expression for k into the equation for U, we get:

U = (1/2)((4π^2M)/P^2) * D^2

So the maximum spring potential energy U of the system is given by:

U = (2π^2MD^2)/P^2

To know more about potential energy,

https://brainly.com/question/24284560

#SPJ1

The integers 0, 1, 2, 3, and so on are the three quantum numbers (n, l, and m) that describe an orbital. There can be no zero for the main quantum number (n). Therefore, the permitted values for n are 1, 2, 3, 4, and so forth. Any integer between 0 and n – 1 can serve as the angular quantum number (l).

To define, how often quantum numbers are needed?

The primary, azimuthal, magnetic, and rotational quantum numbers are the four types of quantum numbers. Quantum numbers provide the values of a quantum system's preserved quantities.

There are four separate quantum numbers that describe each electron in an atom. The fourth (m-s) defines the maximum number of electrons that can occupy the orbital, whereas the first three (n, l, and m) specify the specific orbital of interest.

Each electron in a system with multiple electrons has a different collection of four quantum numbers. As a result, the system He2 possesses four electrons and four different sets of the four quantum numbers.

To know more about quantum numbers  visit;

https://brainly.com/question/26865172

#SPJ4

The period of a pendulum is proportional to the square root of the length of the pendulum divided by the acceleration due to gravity, i.e. T ∝ √(l/g).

Gravity is a force of attraction between two bodies in the universe. It is what keeps planets in orbit around stars and what gives us the feeling of being pulled towards the ground. The strength of gravity is determined by the mass of the objects and the distance between them. The extra huge an item is, the stronger its gravitational pull. The farther aside items are, the weaker the force of gravity between them.

Sir Isaac Newton first described gravity in his law of universal gravitation, stating that every particle in the universe attracts every other particle with a force proportional to the made of their hundreds and inversely proportional to the square of the distance among them. Gravity is a fundamental force of nature and plays a crucial role in shaping the universe as we know it today.

To learn more about Gravity visit here:

brainly.com/question/29785211

#SPJ4

With Mercury planet, the core makes up about 75% of the planet's radius. However, some research estimates that it takes up less than that, around 61%.

Mercury is the smallest planet in our Solar System and the one closest to the Sun. It's named after the Roman god of commerce and messenger of the gods, Mercurius.

This planet has a solid silicate crust. The core layers are also mostly solid, consisting of an iron sulfide outer core, a deeper liquid/molten core layer, and a solid inner core. The diameter of Mercury is 3,030 miles; its iron core extends from the center of the planet around 85% of the way to its surface.

Learn more about Mercury at https://brainly.com/question/29357060

#SPJ4

The given statement  " to achieve good piezoelectric response, a material should have both a high piezoelectric coefficient and have high electrical resistivity." is false because to achieve good piezoelectric response, a material should have a high piezoelectric coefficient, but low electrical resistivity.

A high piezoelectric coefficient means that the material has a strong ability to generate an electrical charge when subjected to mechanical stress, which is the hallmark of good piezoelectric performance. However, high electrical resistivity reduces the flow of electrical charge, which can hinder the performance of piezoelectric materials. Therefore, to achieve good piezoelectric response, a material should have a high piezoelectric coefficient and low electrical resistivity.

You can learn more about piezoelectric at

https://brainly.com/question/29690670

#SPJ4

The right response is that the dry air will get even more dry and the wet air will become increasingly moistened, according to the stated statement.

The kelvin is the fundamental unit of temperatures in the World System of Units (SI). Its identifier is K. The Continental scale, inside which 0 degrees corresponds approximately to the 0 ° c and 100 degrees to its boiling at sea level, is frequently practical for use in common applications.

The atmosphere will get drier and the humid air will get even more humid. The overall humidity will increase and water will condense as warm, wet air mixes with cold, dry air. After then, it can return to the ground as precipitation.

To know more about Temperature visit:

https://brainly.com/question/27944554

#SPJ4

The complete question is-

Two rectangular tanks contain air that have a constant temperature and are connected by a single valve. One tank is holding moist air, while the other is holding dry air. Once the valve is opened, what is most likely to happen?

a). The two air masses will remain stationary and not mix.

b). The two air masses will mix until an equilibrium is reached.

c). The moist air will become even moist, and the dry air will become even more dry.

d). None of the answers are correct.

the value of height in meters is 6.55 m.

We can use the equation for distance and the velocity-time equation to solve for height since the item travels a distance of h/3 in the final 0.97 s of its fall.

When an object is falling freely under the effects of gravity, the following equation gives the distance:

Distance = (1/2) * Acceleration * Time * Initial Velocity * Time

Since the item is starting from rest, its initial velocity is zero, and its gravitational acceleration is 9.8 m/s2. To find h, we can enter the following values into the equation:

h/3 = [tex](1/2) * 9.8 m/s^2 * 0.97 s^2[/tex]

calculating h:

h = [tex](2 * (h/3)) / (0.97 s)^2\\[/tex]

h = [tex](2 * (h/3)) / (0.97 s)^2[/tex]

h =[tex](2 * (h/3)) / 0.9409[/tex]

h = 6.55 m

To know more about height, click here,

brainly.com/question/73194

#SPJ4

The supplied sentence indicates that a. positive, b. negative is the appropriate response.

Velocity is the pace and direction about an object's movement, whereas speed is the timekeeping at which a object is travelling along a path. In other words, velocity is a vector, whereas speed is still a scalar value.

Quickness on motion or activity is known as velocity. Speed is a shorter term and a synonym for celerity. The term "velocity" in physics especially describes the measurement of an object's rate or direction of positional change. It's a vector number that describes a body's motion in terms of both speed and direction.

To know more about velocity visit:

brainly.com/question/18084516

#SPJ4

When light enters the water, it slows down, but it continues to travel straight through the water, so it does not change its appearance. This is why water appears colourless, even though it interacts with light in other ways.

Water is significant because it is essential for life on Earth and plays a vital role in many natural processes. It is a universal solvent, meaning it dissolves a wide range of substances, making it important in chemical reactions.

Yes, hydrochloric acid (HCl) is soluble in water. It dissolves in water to form hydronium ions (H3O+) and chloride ions (Cl-).

To know more about acids, visit here:

https://brainly.com/question/14072179

#SPJ4

The rock was initially stationary and has fallen the same distance as the ball, the speed of the ball relative to the rock is 86.4 m/s.

The speed of the ball can be calculated using the equation of motion for freely falling objects, v = gt + v0, where g is the acceleration due to gravity (9.8 m/s^2), t is the time elapsed since the ball was launched (t = 28.0 m / g = 2.86 s), and v0 is the initial speed of the ball (36.0 m/s).

The final speed of the ball, v, is given by:

v = gt + v0 = 9.8 * 2.86 + 36.0 = 86.4 m/s.

Acceleration is the rate of alternate of speed with respect to time. It is a vector quantity and is expressed in units of meters per second squared (m/s^2). Acceleration can be negative or positive, depending on the direction of the velocity change. Positive acceleration means that an object is speeding up, while negative acceleration means that it is slowing down. Zero acceleration means that an object is moving at a constant velocity.

There are several ways to calculate acceleration, including the formula a = (v_f - v_i) / t, where v_f is the final velocity, v_i is the initial velocity, and t is the time elapsed.

Acceleration can be due to various forces, including gravity, friction, and net forces from external sources. An object under the influence of gravity experiences constant acceleration, known as the acceleration due to gravity, which is 9.8 m/s^2.

To learn more about Acceleration visit here:

brainly.com/question/20382454

#SPJ4

The work done is 10 J and it took 2 seconds to do the work.

So, power = work done / time taken

Power = 10 J / 2 s

Power = 5 Watts

So, the body has a power of 5 Watts.

What is power?

Energy transfer or work output is measured in terms of power. It has a scalar value and is quantified in watts (W). P = W/t, where P represents power, W is the amount of work completed, and t is the amount of time required, which is the formula for power.

Power can be used to define the rate of heat transmission in a system, the rate at which a machine performs work or the rate at which energy is transferred in a circuit. It is a key idea in physics since it is applicable to many disciplines, such as electrical engineering, mechanics, and thermodynamics.

Power is also referred to as activity in ancient writings. A scalar quantity is a power.

To know more about power, check out:

brainly.com/question/11569624

#SPJ1

Also because field lines entering and leaving a closed surface are equal, the magnetic flux through the surface is zero.

→ds=qϵ0. As we all know, the amount of charge contained by a surface determines the quantity of electric flux through it rather than its size, shape, or area. Given that the enclosed charges in the figures are identical, the electric flux across each surface should be identical.

Gauss' law states that the electroluminescence through some kind of closed surface is commensurate to the net charge contained by the surface. Consequently, when the surface's net charge is contained, is 0, the closed surface's electric flow is also zero.

To know more about magnetic visit :

https://brainly.com/question/3617233

#SPJ4

The object which completely absorbed the white light can be a Black Body.

An object that completely absorbs all of the light that strikes it, with none transmitted or reflected, is referred to as a black body.

A black body is a theoretical concept in physics, and is characterized by its ability to absorb all wavelengths of electromagnetic radiation that fall upon it.

In reality, there are no perfect black bodies, but materials that are dark and have a high absorption coefficient, such as carbon black, can approach this ideal.

Black bodies play an important role in thermal radiation and the study of thermodynamics, as their absorption and emission of electromagnetic radiation is well understood and can be used to study other physical systems.

Read more about Absorption of Light:

https://brainly.com/question/15076977

#SPJ4

Answer: True

A weak hydrogen bond makes water liquid at room temperature. Electronegative oxygen forms these bonds with electropositive hydrogen.